快速支持
直接联系认证专家
(Full specifications can be found on datasheet)
Accurate 0.1% to 1%
Wide range from 0.01 Ω - 100 M&Omega (Depending on Model)
Broad choice of standard and optional models with many powerful features
Compact, convenient, and rugged
Now Includes a NIST Traceable Calibration Certificate
Panel Mounting, Shielded Case and Fuse Protection options available
Direct reading and Error proof
Color Coded
(See datasheet for full specifications)
| Model |
RS-200
|
RS-201
|
RS-200W
|
RS-201W
|
RS-200-2W
|
RS-201W-2W
|
RS-RTD
|
| Type |
Resistance
|
Precision Resistance
|
Wide-Range Resistance
|
Wide-Range Precision Resistance
|
High Power Resistance
|
High-Power / Wide-Range Precision Resistance
|
RTD Simulator
|
| Accuracy |
±(1%+25 mΩ)
|
±(0.1%+25 mΩ)*
|
±(1%+36 mΩ)
|
±(0.1%+36 mΩ)*
|
±(1%+25 mΩ)
|
±(0.1%+36 mΩ)*
|
±(0.1%+25 mΩ)
|
| Decades |
7
|
7
|
9
|
9
|
7
|
9
|
6
|
| Range |
0 - 9,999,999 Ω
|
0 - 99,999,999.9 Ω
|
0 - 9,999,999 Ω
|
0 - 99,999,999.9 Ω
|
0 - 9,999.99 Ω
|
||
| Resolution |
1 Ω
|
0.1 Ω
|
1 Ω
|
0.1 Ω
|
0.01 Ω
|
||
| Ratings |
0.5 W (rising to 2.5 W at step 9)
|
2 W (rising to 10 W at step 9)
|
0.5 W (rising to 2.5 W at step 9)
|
||||
| Residual |
≤0.39 Ω (≤0.056 Ω/decade)
|
≤0.5 Ω (≤0.056 Ω/decade) |
≤0.39 Ω
|
≤0.5 Ω
|
≤0.34 Ω
|
||
| Components |
Metal film resistors; Manganin wire ≤ 0.9 Ω
|
||||||
| Physical |
A
|
B
|
A
|
B
|
A
|
||
| A | 8.1 x 7.9 x 5.6 cm; 184 g (3.2 x 3.1 x 2.2 in; 6.5 oz.) | ||||||
| B | 12 x 7.9 x 5.6 cm; 235 g(4.7 x 3.1 x 2.2 in; 8.3 oz) | ||||||
| C | 18.8 x 11 x 6 cm, 410 g (7.4 x 4.3 x 2.4 in, 14 oz) | ||||||
| *Accuracy: After subtraction of residual impedance: traceable to SI. For 0.1% models accuracy is ±(0.2%) for ≥ 10 MΩ | |||||||
The RS Series Resistance Substitution Box is the most commonly used decade box on the market today. The RS Series is not only easier to use, but it is also priced lower than most its competition.
The easy of use and 0.1% accuracy makes the RS Box ideal for daily verification of test equipment before measurements, troubleshooting in the field or on the factory floor.
One nice feature of the RS Series is that it uses convenient side by side, color coded, thumbwheel switches allowing for direct reading — There is no fumbling with multiple slide or rotary switches. Simply dial in the desired values and use!
Made of high impact plastic and weighing less then a pound, these substituters are very portable and can reduce clutter on a busy lab bench.
