INSIZE IST-17W20A 有线传输数字扭矩扳手（键盘信号） (4-20 N.m)

Type: type A (short handle)

Range: 4-20 N.m

Accuracy: clockwise: ±2%, couter-clockwise: ±3%

Tolerance setting range: -20% ~ +20% (target torque value)

Resolution: 0.01 N.m

Square driver (L): 1/4"

Power Supply: 2 x AAA battery

Length: 215mm

Weight: 750g

Torque wrench:

- Unit: N.m, in.lb, ft.lb, kg.cm

- Clockwise and counter-clockwise operation

- Peak and track working mode

- Can set tolerance with judgement in peak working mode

- 9 target torque values can be set, with audible and visible alarm:

Green LED light on and buzzer sounds when torque value is 80%-99.5% of target torque

Both green and red LED light on and buzzer sounds when torque value is over 99.5% of target torque

- Power off in 2 minutes automatically

Non-slip grip handle

- With overload record (once the torque reaches 110% of the maximum range)

Data transmission:

- Keyboard signal through a cable, can be transmitted to Excel, Word, Txt, etc - Press the output button once to output a value