快速支持
直接联系认证专家
Maximum range: 100N.m
Rated RPM: 8000rpm
D: 18mm
B: 73mm
L: 168mm
L1: 33.6mm
H: 35.5mm
H1: 93mm
A1: 53mm
A2: 50mm
B1: 53mm
B2: 77mm
D1: 41mm
M: 4-M8 depth 10
M1: 8-M8 depth 6
N: 2-Ø8 depth 10
Key size (LxW): single key 22.6
P: 14.5mm
RPM signal: 120/60/10 pulses/rev.
Zero output: ±0.1%F.S.
Accuracy: 0.1%F.S.
Hysteresis: 0.5%F.S.
Repeatability: 0.1%F.S.
Creep (30 minutes): 0.05%F.S.
Temperature sensitivity drift: 0.05%F.S./10°C
Zero temperature drift: 0.05%F.S./10°C
Response time: 0.6ms (50% response)
Response frequency: 1kHz
Max. torsion angle: 2.6×10rad (0.149°)
Inertial torque: 0.38kg.cm
Intrinsic frequency of rotor vibration: 19.4kHz
Torque constant: 3.85×10N.m/rad
Material: Stainless steel
Annual stability: 0.3%/year
Load resistance: >2ΚΩ
Power supply: DC24V 0.2A
Working environment: -10~50°C ≤85%RH
Safety overload: 150%
Extreme overload: 200%
Cable specification: Ø5mm*3m
Extreme cable pulling force: 10kg
■Real-time display of torque, RPM and power values
■Support RS485 communication, support active uploading protocols
■Communication rate up to 1000 Hz
■Torque signal is ±5V transformed voltage output
■ OLED display, resolution 128*64
■Simple calibration, zeroing, filtering, etc. can be performed
Datasheet
