快速支持
直接联系认证专家
Maximum range: 3N.m
Rated RPM: 8000rpm
D:10mm
B: 51mm
L: 108mm
L1: 18mm
H: 25.5mm
H1: 68mm
A1: 58mm
A2:/
B1: 43mm
B2: /
D1: 12mm
M: 4-M3 depth 6
M1: /
N: /
Key size (LxW) single key 15x3
P: 8.2mm
RPM signal: 120/60/10 pulses/rev.
Zero output: ±0.1%F.S.
Accuracy: 0.1%F.S.
Hysteresis: 0.5%F.S.
Repeatability: 0.1%F.S.
Creep (30 minutes): 0.05%F.S.
Temperature sensitivity drift: 0.05%F.S./10°C
Zero temperature drift: 0.05%F.S./10°C
Response time: 0.6ms (50% response)
Response frequency: 1kHz
Max. torsion angle: 2.6×10rad (0.149°)
Inertial torque: 0.38kg.cm
Intrinsic frequency of rotor vibration: 19.4kHz
Torque constant: 3.85×10N.m/rad
Material: Stainless steel
Annual stability: 0.3%/year
Load resistance: >2ΚΩ
Power supply: DC24V 0.2A
Working environment: -10~50°C ≤85%RH
Safety overload: 150%
Extreme overload: 200%
Cable specification: Ø5mm*3m
Extreme cable pulling force: 10kg
■Real-time display of torque, RPM and power values
■Support RS485 communication, support active uploading protocols
■Communication rate up to 1000 Hz
■Torque signal is ±5V transformed voltage output
■ OLED display, resolution 128*64
■Simple calibration, zeroing, filtering, etc. can be performed
Datasheet
