J.P. SELECTA KIT 整套套件搅拌器Agimatic ED，带支撑杆和温度传感器PT100，带加热功能 (60~1600rpm; 50~350°C; 10L; 550W)

For speeds from 60 to 1600 r.p.m.

For adjustable temperatures from 50°c to 350°c (200ºC with external probe). Accuracy ±2°c.

Maximum compression volume: 10 liters.

Plate Ø: 14.5 cm.

With adaptable safety ring against spills.

Supplied complete with pt100 temperature probe, rod, clamp with nut and magnet.

Digital electronic regulation of heater speed and temperature.

Maximum stir  volume litres: up to 10

Height/width/Depth  (exterior) cm:  14.5      19      26 

Power  W: 550

Weight  Kg: 3.2

Supplied with a PTFE coated stir bar of Ø 8 x 40 mm long.

CONTROL PANEL

1. Digital display indicating stir speed or temperature.

2.Pushbutton,parameterselector,StirspeedorTemperature.

3. Push button, increase parameter value.

4. Push button, decrease parameter value.

5. Indicator lamp, safety thermostat “on”.

6. Push button Stop-Start. 

SILUMIN UPPER PLATE COVERED BY AISI 304 STAINLESS STEEL.

Precision ±2 °C.

Supplied with a PTFE coated stir bar of Ø 8 x 40 mm long.

INCLUDED

Support rod with thread of 12 mm Ø x 500 mm high,stirrerdependent,attachestothemain body of the stirrer.

Temperature sensor Pt100. Controls the sam- ple temperature in the digital hotplate stirrers. Immersion Probe: 4mm Ø x 130 mm long.

Cable connector 150 cm long.

Clamp with bosshead , “AUTOMATIC” Chrome coated alloy with screw closure.

For Ø from 0 to 25mm.