快速支持
直接联系认证专家
| Parameter | PFP7 |
| Range | 0 to 199.9ppm |
| Limits of detection Na | 0.2ppm |
| K | 0.2ppm |
| Li | 0.25ppm |
| Ca | 15ppm |
| Ba | 30ppm |
| Reproducibility | <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50 |
| Linearity | < 2% error when 3ppm Na/K and 5ppm Li are set to read 100 |
| Stability | < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5% |
| Recorder output | Nominal 1.00V for a reading of 100.0 |
| Electrical supply | 90-125V or 190-250V @50/60Hz |
| Air supply | Moisture and oil free, 6 litre/min @ 14psi |
| Fuel | Propane, butane, natural gas or LPG |
| Size (w x d x h) | 420 x 360 x 300mm |
| Weight | 8kg |
Ordering Information
| Part Code | Description |
| 500 701 | PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (230V/50Hz) |
