For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

JFE MK-64-S003 Vibration Monitor

ModelMK-64-S003
联系我们
安全结算
品质保证
轻松更换与退货
支持配送

Vibration Pickup: Piezo-electric acceleration type 5.1mV(m/s2) (50mV/G)

Measuring mode & frequency range: 

A1 Acceleration OA (5Hz to 20kHz)

A2 Acceleration OA (1kHz to 20kHz)

A3 Acceleration PEAK (1kHz to 20kHz)

V Velocity OA (5Hz to 1kHz)

D Displacement (p-p) (5Hz to 1kHz) 

Measuring range 5 ranges in each mode:

A1 0.5, 1.5, 5, 15, 50 G

A2 0.5, 1.5, 5, 15, 50 G

A3 0.5, 1.5, 5, 15, 50 G

V 0.5, 1.5, 5, 15, 50 cm/s

D 50, 100, 200, 500, 1000 μm

Accuracy:

Conversion error: 0.2%F.S

Measurement condition:

Acceleration(A1) "Sine wave at 1kHz 1G" in 5G range

Velocity (V) "Sine wave at 155.97Hz 1cm/s" in 5cm/s range

Displacement (D) "Sine wave at 70.46Hz 50μm" in 200μm range

Non-linearity:

Acceleration(A1),(A2) ±1% F.S.

Velocity(V),Displacement(D) ±5% F.S.

Measurement condition: at 50m/s2, 50mm/s and 500μm in the range of full scale 10% to 100%

Range switching error: ±3%

Measurement condition: Error against original input data, at measurement of input signal equivalent to 20% in full scale range, at one-step rougher range

Alarm output:

One upper limit level in each of OUT1 and OUT2

Output: Relay contact 1a

Contact capacity 5W(AC 100V 0.05A, DC 24V 0.2A) (max. voltage AC110V DC100V, max. current 1A)

An alarm is outputted after the time (0 - 15 seconds) set up by the on-delay timer, from the time of measured value at exceeding an alarm level.

An alarm is not outputted if the measured value is below alarm level during the delay time.

Output:

DC 4 to 20mA Allowable load resistance under 500Ω (Terminal block on the back side)

(Equivalent to P-P at Displacement mode only, equivalent to O-P at other modes)

AC PU through signal (5.1mV/(m/s2)) (Output from BNC connector on the front panel)

(PU through signal is outputted at original detected signal.)

Operating temperature:  -10 to 60 degrees Celsius (No condensation)

Power supply: AC 85~264V 50/60Hz, below 10W (Fuse rated 0.5A)

Dimensions: 54W × 180H × 160D mm (No fitting and protrusions included in external dimensions)

Mass: Approx.880g

Catalog

获取优惠更新

获取专属批量折扣、批发价格更新和新产品通知,直接发送到您的邮箱。

订阅即表示您同意我们的服务条款隐私政策

快速支持

直接联系认证专家