JISC UFT-2KN 自动聚氨酯泡沫测试仪

Test Table Size: 1000 x 700 mm

Standard Anvil Dia: Universal Ball Joint ɸ 200mm anvil

Applicable Specifications: JIS B 7721 COMPRESSION / TENSION TESTER CLASS 0.5

Stroke: 550mm

Length Resolution: 0.1 or 0.01 mm (convertible)

Length Accuracy: Within ± (0.05+0.0001L)mm (L is arbitrary length in mm)

Test Speed: 1~1000mm/min

Cross Head Control: Precision ball screw and AC servo motor controlled

Move Key Function: High Speed : 600 (mm/min) Step (Inching) 1 (mm);  Medium Speed : 60 (mm/min) Step (Inching) 0.1 (mm);  Low Speed : 6(mm/min) Step (Inching) Noting

Capacity: Main body is capable for 2kN

Load Cell: 3 load cells (Useful for unbalance load and precision measurement)

Range Changeover: 4 Ranges Manual or Automatic

Load Resolution (Measurement Range/ Load resolution): 2000N/ 0.1N; 1000N/ 0.1N; 500N/ 0.1N; 200N/ 0.01N

Load Accuracy: ± 0.5{eb9cfd4e3b516869cb839b8b2c338ebd16b99827caa87fe8648376116c5dd92c} of Applied Load

Unit: N kN(kgf. lbt)

Protective STOP Function: STOP via Up/Down Limit Switches; STOP via range over; STOP via STOP key or Emergency STOP key; STOP via value set by testing software

Display: LCD LCD with CCFL Backlingt; Backlight lifespan 25.000h Half-reduced brightness lifespan; Display Area W147 x H110mm; Display Resolution 640 x 480 dot

PC Software: The tester alone can perform testing; MXR-01 (Urethane Foam testing mode)

Printer (Internal Printer): Thermal transfer dot printing; Print density 8 dot/mm; Effective print width 108mm; Print speed: 480 dot line/sec

Interface: RS232C; Photocoupler insulated input / output + common; Input 8 points output 8 points (judgment output); Analog output : FORCE, DISTANCE

Power supply: Single phase AC100V or AC200V

Power Rating: 300VA

Dimension: W1115 x D750 x H1980

Weight: Approx. 350kg

• Deliver High Precision Measurement via 3 load cells even if there is unbalance load. The tester alone can meet a variety of specifications such as JIS K6400-2, JASO B408 & etc.

• This UFT series can satisfy a variety of urethane foam test. The 3 load cells enable this tester to deliver high precision load detection even in the presence of unbalance load. Test sample placed on the wide test table (1000 x 700mm) can be measured just as it is. For instance a car seat can also be place on the test table and measurement can take place as it is. The installed urethane foam testing program can change “{eb9cfd4e3b516869cb839b8b2c338ebd16b99827caa87fe8648376116c5dd92c}”, “Cycle” and “Time”.

• The tester also meets the Hardness Test and Deflection Test Specifications of Automotive Manufacturer under fixed load.

• Test Conditions and Results can be stored in USB Memory and export to Microsoft Excel for Test Inspections. The tester also adopts “Program Load” via USB Memory and it can also meet requirements of any custom made test.

• External control test using PC Software is also possible.

TYPE OF TEST

Hardness Test JIS K6400-2 Method A, B, C & D

Compression Deflection Test JIS K6400-2 Method A-1 & A-2

Compression Deflection Test JIS K6400-2 Method B

Micro Displacement Spring Rate Test

Stress Relaxation Test

Compression Load Test

External Control Test via PC

DATASHEET