JSR JSOF-250P Programmable Upright Convection Oven (250 L; +10 °C ~ +250 °C)
Dimension Data
Chamber Volume: 250 Liters
Inner Dims. (W x D x H mm): 500 x 500 x 1000
Outer Dims. (W x D x H mm): 895 x 675 x 1360
Window Dims. (W x H mm): 150 x 460
No. of Shelf Positions: 36 ea
No. of Shelf included: 3 ea
No. of Ventilation Damper: 1 ea
Performance Data
Heating System: Forced Air Convection
Temp. Range: Amb. +10 °C ~ +250 °C
Accuracy at 120 °C: ±0.3 °C
Uniformity at 120 °C: ±1.5 °C
Heat up time to 120 °C: 10 min.
Controller
Processor: Digital Microprocessor PID Temperature Controller
Display: Back Light Graphic LCD Display
Panel: UV Coated Polycarbonate Solid Touch Panel
Button: Capacitive touch LED Lighting Touch Button
Interface: Push and Rotary encoder type Jog Dial
Control Logic: 3 Zone PID Control
Calibration (Offset): 1 Point Temperature Offset
Calibration (Multi-point): 3 Point Temperature Calibration
Resolution: 0.1 °C
Programming: 10 Step Temperature Program, 1 ~ 999 or unlimited times repeat
Auto-Stop Timer: 1 min. ~ 99 hr 59 min
Auto-Start Time: 1 min. ~ 99 hr 59 min
Sensor: Class A PT-100 Ω Sensor
Power Restoration: Power and Timer Restoration Function
PC Communication Interface: RS-232C [Option]
Safety Data
Sensor Safety: Sensor short or disconnection Audio Visual Alarm
Controller Safety: Controller cut-off heater and Audio Visual Alarm
HI-ALARM: +10 °C above set temp.
LO-ALARM: -10 °C below set temp.
Independent Safety: Independent analog thermostat cut-off heater
Door Safety: Door sensor Cut-Off heater and fan Audio Visual Alarm
Over Current: Over Current Cut-Off
Material Data
Body: Epoxy Powder Coated Steel
Chamber: Stainless Steel 304 (AISI304)
Insulation: 50 mm Woven Mineral Wool
Electrical Data
Rated voltage: 220 ± 10% VAC
Power frequency: 50 / 60Hz
Heater Output: 3.0 kW (1.5 kW x 2)
Nominal power: 3.1 kW / 14.0 amp
Phase: 1 Phase
Plug configuration: CEE 7/7 Schuko or BS 1363
Usable Condition
Temp. & Humidity: 5 °C - 40 °C, < 80% RH
Net Weight: 115.0 kg
直接联系认证专家

