Kett DT-8 在线铁探测器 (10W/channel)

Detection Method: Magnetic induction method

Detection ability (example: distance): Small iron piece (about the size of an insect pin): approx. 60mmLarge iron piece (bolt M7 x 50mm): Approx. 300mm

Alarm method: Buzzer, lamp (large red) are shared action for all channelsLamps (small red) are individual action for each channel

Two ways of continuous alarm and instant activation (selected with hold switch)

Number of channels :1 to 4 *5 or more are optionally available

External control: Contact circuit (non-voltage)MAKE or BREAK (selected with hold switch interlocked with alarm)

Power supply: 200V/220V/240V are optionally available

Accessories:

Power cable 2.5m

Sensor cable 5m (1 per channel)

External control cable 1m (0.75mm3, 4 cores)

Electronic buzzer (cable length 2.5m)

Spare fuse

Operating Manual

Dimensions / weight : 

400 (W) x 280 (D) x 250 (H) mm / 10Kg (1 channel type) 

465 (W) x 305 (D) x 220 (H) mm / 15Kg (2/3/4 channels type)

Stationary iron piece detector for installing on the production line

Detects iron pieces mixed into products and raw materials with high sensitivity

Sensor effective width can be ordered in 100mm increments from 500mm to 4000mm

1 to 4 channels can be ordered for sensing position division

Manual