Labstac WD152 离子减少系统

Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: -

Ion rejection rate: 96%-99% 

Organic rejection rate: >99% (when MW>200 Dalton)

Particles and bacteria rejection rate: >99%

Bacteria: <0.1 cfu/ml

Particles(>0.2µm): <1/ml

Output(25°C)****: 10 L/hrs

Pure water outlet: 2: RO water, Electro Deionization water

DimensionLxWxH: 500×360×540 mm

Weight: 25 kg

Standard configuration: Main body (Including 1 set of cartridges) + 20 liters tank+ accessory bag

Power Consumption (W): 120 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. 

**PF:polypropylene spun fiber, KDF:kinetic degradation fluxion, AC:active carbon, RO:reverse osmosis, SF:softener, 

EDI: electro deionization, UV:ultraviolet, TF:terminal microfiltration. 

***Value of number will be influenced by temperature and feed water quality. 

****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

TOC***: <30 ppb

Flow procedure**: PF+KDF+AC+RO+SF+EDI+UV+TF

Resistivity***: >5 MΩ.cm

Silicon rejection rate: >99.9%

Datasheet