快速支持
直接联系认证专家
Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Temperature: 5-45°C
Pressure: 1.0-4.0 Kgf/cm²
Flow Procedure**: PF+AC+RO+AC
Ion rejection rate: 96%-99% (New RO membrane)
Organic rejection rate: >99% (when MW>200 Dalton)
Particles and bacteria rejection rate: >99%
Bacteria: <0.1 cfu/ml (with optional 0.45+0.1µm PES terminal filter)
Particles(>0.2µm): <1/ml (with optional 0.45+0.1 µm PES terminal filter)
Output(25°C)****: 125 L/hrs
Pure water outlet: RO water
Water Quality Monitor: Portable TDS/conductivity test pen + on-line conductivity monitor
DimensionLxWxH: 640×540×1110 mm
Weight: 70 kg
Standard configuration: Main body (Including 1 set of cartridges) + 2 built-in15 liters tank+ TDS pen +accessory bag
Power Consumption (W): 240 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.
**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis.
***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
