快速支持
直接联系认证专家
Temperature control range: room temperature ~ 300℃
Temperature resolution: 0.1℃
Maximum temperature measurement error: ±0.5℃
Maximum temperature control error: ±0.5℃/6 minutes (50℃/h), ±1.0℃/6 minutes(120℃/h)
Heating rate: 50℃±5℃/h, 120℃±10℃/h or any set heating rate
Maximum deformation measurement range: 1.0mm
Maximum deformation measurement error: ± 0.001 mm
Thermal deformation test span: 64mm, 100mm, 101.6mm (D648 A method) other requirement can be customized
Radius of hot deformed indenter and support: R3.0 ± 0.02mm
Vicat needle area: 1.0 mm2
Vicat needle length: 3.0mm
Mass of load bar and tray: 76 ± 0.35g
Number of sample racks: 3 racks/4 racks/6 racks (optional)
Heating medium: methyl silicone oil (below 200 centistokes, flash point above 300℃, preferably 100 centistokes, flash point above 300℃)
Lifting method: electric lifting of sample holder and weight holder,
Cooling mode: natural cooling above 150℃, water cooling below 150℃
Power supply: AC220V, 50Hz, 3.4KW
