Live Webinar: Speed Up Your Production Test in Industrial 4.0

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible.

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible. Overall test time is a function of charge time, measure time, and discharge time, as well as the time to setup and process the test.

When a typical test program executes from a PC controller, it continually communicates back and forth with the test instrumentation. This communication time, whether it is over GPIB, LAN, USB, or some other protocol, is often one of the largest contributors to slower test times. Embedded test scripts minimize this communication time by storing and then executing entire test programs directly from the instrument’s non-volatile memory. All setup, decision-making, and data storage is now done from inside the instrument itself, independent of the PC.

Join us to learn about, what is a SMU and TSP. Experience the speed and power of the Keithley SMU and TSP, helping you in the new world of Industrial 4.0

DATE: 2/9/2020, Wed

TIME: 2:00 PM (GMT+8)

相关新闻

2026年11月14日 11時35分16秒

What Is Fiber Polarity and How Do You Choose an MPO Method?

Fiber polarity ensures the transmit path connects to the corresponding receive path. For MPO-based duplex channels, the selected method must remain consistent across trunks, cassettes, adapters, and patch cords.

2026年11月14日 10時28分19秒

The scent of new wood in a newly handed-over apartment: How to measure and address formaldehyde (HCHO) levels before moving in

Many people refer to the pungent, acrid odor that emerges when opening a new cabinet as the "smell of new wood," assuming it will simply dissipate after a few days. In reality, however, what is being released could well be formaldehyde—a substance originating from the adhesives used in the pressed-wood panels—and our sense of smell is not a reliable enough gauge to determine the concentration levels present

2026年11月13日 17時23分39秒

Guide to Selecting a TCLP Toxicity Characteristic Leaching Procedure Shaker Configuration in Compliance with QCVN 07:2025/BNNMT and TCVN 9239:2012

Regulation QCVN 07:2025/BNNMT (replacing QCVN 07:2009/BTNMT and QCVN 50:2013/BTNMT) specifies hazardous waste and sludge thresholds based on leachate concentrations. To ensure that analytical results for heavy metals and organic compounds are accepted during ISO/IEC 17025 or VIMCERTS assessments, laboratories must comply with the Toxicity Characteristic Leaching Procedure (TCLP) specified in TCVN 9239:2012, which is equivalent to US EPA Method 1311

2026年11月13日 16時11分22秒

Checking the Temperature of Paint and Coating Surfaces After Curing Using an Infrared Thermometer

An infrared thermometer allows surface temperature measurement without direct contact, making it suitable for products coming out of curing ovens or surfaces that are difficult to access. However, to ensure reliable results for production quality control, it is important to understand the measurement principle and the factors that affect measurements on painted and coated surfaces.

2026年11月13日 15時07分40秒

Crowded Gyms and Yoga Studios: How to Manage Air Quality to Retain Members

Around 6 or 7 in the evening, the gym becomes packed; the music drowns out the sound of heavy breathing, and the air conditioning runs at full blast behind closed doors. At first glance, everything seems fine: the room is cool, the lights are bright, and the equipment is state-of-the-art. Yet, after just a few sessions, regular members begin to feel a heavy-headedness and find themselves running out of breath more quickly eventually, they simply stop renewing their memberships. No one complains about the personal trainers or the exercise machines. The very thing that makes them feel stifled and drives them away is something entirely invisible: the air inside the room