MATRIX MCR-9005 高频LCR测试仪 (10Hz~5MHz)

Test Frequency:

Range: 10Hz~5MHz

Minimum Resolution: 100mHz, 6-bit Frequency Input

Accuracy: 7 ppm±100mHz

Basic Accuracy: ± 0.05%

AC Measurement:

Test Signal Voltage Level: 10mV - 2Vrms

Voltage Minimum Resolution: 1mV

Accuracy: ALC ON：6% * Voltage ± 2mV / ALC OFF：10% * Voltage ± 2mV

Test Signal Current Level: 200µA - 20mArms

Current Minimum Resolution: 10µA

Accuracy: ALC ON：6% * Current ± 20µA / ALC OFF：10% * Current ± 20µA

DC Measurement: 1V (fixed)

Test Time  (The fastest): < 3ms

Output Impedance: 25Ω/100Ω, switchable (Nominal value)

Parameters: |Z|, |Y|, θ, X, R, G, B, L, D, Q, DCR, C,  Vdc-Idc, ESR, ε' ε"and μr' μr"

Measurement Mode: Meter mode, list mode

Measurement Circuit: Series/Parallel

Correction: Open Circuit/ Short Circuit/Load correction

List mode: 50 groups of Multi-steps setting (Each group contains up to 15 steps)

BIN: 9

Comparator: ABS, ΔABS, Δ%, OFF

Bulit-in Storge: 100 sets LCR Meter setting documents, 50 sets list mode setting documents

USB Host Storge: LCR setting documents, list mode setting documents, BMP graphics

Interface: RS-232, GPIB, Handler, LAN, USB Host/Device

Power Supply: 

Voltage: 90V ~ 264Vac

Frequency: 47Hz ~ 63Hz

Power Consumption: Low power consumption: Maximum 30W (Nominal value)

Display: 7.0”TFT, 800x480 color screen

Environment: Temperature: 10℃ ~ 40℃ Humidity: ≦80%

Dimension (W*H*D): 336x147x340 mm

Weight: 3 kg

Datasheet