快速支持
直接联系认证专家
- Volume: 74 liters
- Interrior dimensions: width 400 x height 560 x depth 330 mm
- Exterior dimensions: width 585 x height 944 x depth 514 mm
- Stainless steel grids (standard): 2
- Max. number of grids/shelves: 6
- Working temperature range: at least 10 above ambient temperature to 2500C
- Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C
- German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
- ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function setpointWAIT: the process time dose not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones
- Forced air circulation by quiet air turbine, adjustable in 10 % steps
- Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps
- Programme stored in case of power failure
- Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
- Autodiagnostic system: for fault analysis
- Interface: Ethernet
- Door: fully insulated stainless steel door with 2-point locking
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
- Internal data logger with a storage capacity of at least 10 years
- 100% AtmoSAFE
- Voltage: 230 V, 50/60 Hz
- Electrical load: approx. 2500 W
- Ambient temperature: 5 – 400C
- Humidity: max. 80% rh, non-condensing
Accessories:
+ Works calibration certificate at 1600C (Memmert supply)
+ Stainless steel grid, 2 pcs
+ Manual
