Memmert SN110 消毒器（108L）

-  Volume: 108 liters

-  Interrior dimensions: width 560 x height 480 x depth 400 mm

-  Exterior dimensions: width 745 x height 864 x depth 584 mm

-  Stainless steel grids (standard): 2

-  Max. number of grids/shelves: 5

-  Working temperature range: at least 5 above ambient temperature to 2500C

-  Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C

-  German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT

-   ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display

-  Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

-  Function setpointWAIT: the process time dose not start until the set temperature is reached

-  Calibration: three freely selectable temperature values

-  Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones

-  Convection: natural convection

-  Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps

-  Programme stored in case of power failure

-  Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

-  Autodiagnostic system: for fault analysis

-  Interface: Ethernet

-  Door: fully insulated stainless steel door with 2-point locking

-  Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

-  Internal data logger with a storage capacity of at least 10 years

-  100% AtmoSAFE

-  Voltage: 230 V, 50/60 Hz

-  Electrical load: approx. 2800 W

-  Ambient temperature: 5 – 400C

-  Humidity: max. 80% rh, non-condensing

Accessories:

+ Works calibration certificate at 1600C (Memmert supply)

+ Stainless steel grid, 2 pcs

+ Manual

Datasheet