快速支持
直接联系认证专家
- Volume: 108 liters
- Interrior dimensions: 560W x 480H x 400D mm
- Exterior dimensions: 745W x 864H x 584D mm
- Stainless steel grids (standard): 2
- Max. number of grids: 5
- Working temperature range: at least 5 above ambient temperature to 800C
- Setting accuracy: 0.10C
- 2 Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking overfunctions in case of an error
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour display.
- Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function setpointWAIT: the process time dose not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- Adjustable parameters: temperature (Celsius or Fahrenheit), programme time, time zones
- Convection: natural convection
- Programme stored in case of power failure
- Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
- Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
- Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
- Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature, overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
- Additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
- Autodiagnostic system: for fault analysis
- Alarm: visual and acoustic
- Door: fully insulated stainless steel door with 2-point locking
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
- Internal data logger with a storage capacity of at least 10 years
- Voltage: 230 V, 50/60 Hz
- Electrical load: 2800 W
- Ambient temperature: 5 – 400C
- Humidity: max. 80% rh, non-condensing
Accessories:
+ Works calibration certificate at 800C (Memmert supply)
+ Stainless steel grid, 2 pcs
+ USB stick with AtmoCONTROL software
+ Manual
