Temperature
Temperature sensor: digital temperature sensor, mounted on the outside of the bath
Temperature: Setting Celsius / Fahrenheit
Working temperature range: at least 5 above ambient to +100 (depending on ambient pressure)
Setting temperature range: +10 to +100 °C
Setting accuracy temperature: 0.1 °C
Safety
Temperature control: two-stage safety system to prevent overtemperature
Temperature control: individually adjustable overtemperature alarm, visual and acoustic
Temperature control: Independent temperature limiter to switch off the heating in case of failure
Autodiagnostic system: microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
Heating concept
Heating: corrosion-proof large-area heating on the outside of the interior
Ambient conditions
Installation: The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Ambient temperature: +5 °C to +40 °C
Humidity rh: max. 80 %, non-condensing
Overvoltage category: II
Pollution degree: 2
直接联系认证专家