快速支持
直接联系认证专家
Man-machine interface
- Display : Large high-contrast 3.5 ‘’ TFT colour screen - resolution 320 x 240
- Controls on front panel :18 direct-access buttons, 1 rotary button
- Adjustment of signal parameters :Continuous adjustment by the encoder and/or numeric keypad
- BNC output terminals on front panel :Generator outputs 1 & 2 - Separate adjustment (waveform, f, phase, amplitude, etc.), coupled or duplicated
- BNC I/O terminals on rear panel :TTL-compatible trigger and synchronization outputs
Continuous signal generation
- Signal types :Sine, Square, Triangle, Ramp, Pulse, White Noise, Arbitrary Signal (48 pre-installed waveforms)
Arbitrary signal generation
- Resolution / Sampling rate :14 bits / 125 MS/s
- Memory 16k memory depth (512k on CH1 only) - Storage of predefined or specific signals on USB key
- Editing of signals with SX-GENE : Acquisition, transfer & modification of a signal acquired from an oscilloscope (OX6000, OX7000, Scopein@Box). Graphical or mathematical editing with the SX-GENE software. Modification of a signal acquired and/or combination of standard signals from the generator
Signal frequency
- Frequency range :Sine from 0.001 mHz to 25.000 MHz,Triangle 300 kHz, Noise and Square 25 MHz, Pulse 10 MHz, Arbitrary Signals 5 MHz
- Resolution / accuracy: 7-digit display – resolution from 1 mHz to 1 kHz depending on frequency range ± 20 ppm for F > 10 kHz , ± 30 ppm for F < 10 kHz
- Long-term drift :± 100 ppm / year
- Temperature coefficient :< 5 ppm / °C
Amplitude
- Voltage levels: Output 1 = 2 mVpp ~ 10 Vpp 50 Ω 2 mVpp ~ 20 Vpp open circuit; Output 2 = 2 mVpp ~ 3 Vpp 50 Ω 2 mVpp ~ 6 Vpp open circuit
- Flatness < 0.1 dB for f < 100 kHz
- Vdc offset :Output 1 = ± 5 VDC at 50 Ω, Output 2 = 1,5 VDC at 50 Ω – accuracy < 5% ±1 mV
- Impedance / Protection :50 Ω / Protection contre les court-circuits
Signal characteristics
- AM Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Noise, Arbitrary (2 mHz-20 kHz)
+ Depth :0% to 120%
- FM Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Triangle, Noise, Arbitrary (2 mHz-20 kHz)
+ Frequency offset :0 to 12.5 MHz (GX1025) / 25 MHz (GX1050)
- FSK Modulation
+ Carrier :Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :50% of duty cycle (2 mHz to 50 kHz)
- ASK Modulation
+ Carrier : Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals: 50% of duty cycle (2 mHz to 50 kHz)
- Điều biến PM
+ Carrier :Sine, Square, Triangle, Arbitrary (except DC)
+ Modulated signals :Sine, Square, Ramp, Triangle, Noise, Arbitrary (2 mHz-20 kHz)
+ Phase offset :0 to 360°
Other functions
- Sweep
+ Carrier : Sine, Square, Ramp, Triangle, Arbitrary (except DC)
+ Type : Linear/Logarithmic
+ Direction :Increasing or Decreasing
+ Sweep time :1 ms to 500 s
+ Trigger : Manual, External, Internal
- Burst
+ Signals : Sine, Square, Ramp, Arbitrary (except DC)
+ Type :Short (1-50,000 cycles), Infinite, Gate
+ Phase start/stop : -180° to +180°
+ Internal period : 1 μs to 500 s +/- 1%
External frequency meter
- Measurement range / resolution : 100 mHz to 200 MHz
- Sensitivity / Input impedance : 20 mVrms for 100 mHz < f < 100 MHz, 40 mVrms beyond / 1 MΩ
General Specifications
- Storage : Storage of predefined or specific signals and complete instrument configurations
- Communication interface : USB Device, USB host - GPIB, LAN option
- Mains power supply : 100~240 VACRMS 45~440 Hz CAT I - < 30W
- Software : The SX-GENE software can be downloaded free of charge from our support website, along with the LV and LW drivers
- Mechanical specifications : L x H x P = 229 mm x 105 mm x 281 mm - 2.8 kg
State at delivery: 1 GX delivered with 1 mains power lead, 1 USB cable and an Operating Manual.
