MICROTEST 6332-10G 阻抗分析仪 (10 MHz)

Test Frequency: 10Hz ~ 10 MHz

Basic Accuracy ± 0.08% 

AC Measurement  

              Test Signal Voltage LeveL:10mV - 2Vrms

              Voltage Minimum Resolution:1mV

              Accuracy: ALC ON：6％ * Voltage ± 2mV

                       ALC OFF：10％ * Voltage ± 2mV

              Test Signal Current Level 200µA - 20mArms

              Current Minimum Resolution: 10µA

              Accuracy ALC ON：6％ * Current ± 20µA

                        ALC OFF：10％ * Current ± 20µA

Test Time  (The fastest): < 3mS

Output Impedance:25Ω/100Ω, switchable (Nominal value)

Parameters: |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε and μr

Measurement Mode:Meter mode, list mode, sweep mode(G series), and equivalent circuit analysis function(GS series)

Calibration:Open Circuit/ Short Circuit/Load Calibration

Measurement Circuit:  Series/Parallel

Equivalent Circuit Analysis:Three elements、Four elements     * This function is option 

Multi-steps Mode:50 groups of Multi-steps setting (Each group contains up to 15 steps)

Built-in DC bias voltage:-12 to +12V, 100Hz to 30MHz

PC LINK / CPK: Option

Flash Memory:Built-in flash for setting 100 set documents

USB:LCR setting documents, BMP graphics, Test result data

Interface  I/O Interface Handler

           Serial Interface     USB、RS232

           Parallel Interface   GPIB

Display: 7.0”TFT, 800x480 Color Screen

Environment Temperature: 10℃ ～ 40℃   Humidity: ≦80%

Power Supply:  Voltage 90V ～ 264Vac

Frequency: 47Hz ~ 63Hz

Power Consumption

Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D): 336x147x340 mm

Weight:  3 kg

Standard Accessories:Test Fixture (FX-000C19)

Optional Accessories:Test Fixture (FX-0000C6),Kelvin Clip Leads with BNC Box (F423906A)

BNC Test Leads (F663001A/B/C), Dielectric Material Test Fixture (FX-0000C7) 

Liquid Dielectric Material Test Fixture(FX-000C20)

Magnetic Material Test Fixture (FX-0000C8) Test Fixture (FX-0000C9)

Bottom Electrode SMD Test Fixture (FX-000C10) 

SMD Tweezers Test Leads (FX-000C11) SMD Test Fixture(FX-000C12)