MITUTOYO MPP-300 Ultra High-Accuracy Scanning Probe

Measurement range: ±1mm

Resolution:0.01 m

Max. permissible probing error: MPEPʺ0.45 m (LEGEX500/700/900: When the ø4X18mm stylus is used.)

Max. permissible probing error during scanning: MPETHPʺ1.4 m (LEGEX500/700/900: When the ø4X18mm stylus is used.)

Spring rate: 0.2N/mm

Max. stylus length: 200mm for both vertical and horizontal

Max. stylus mass: 75g

Stylus mount: M4 screw

Max. tracing speed: 120mm/s [at a known geometry scanning]

Air flow rate: 30NL/min

Probe head: N/A

Applicable models: CNC CMM (LEGEX500/700/900/1200 series)

Automatic stylus change system (optional): 

- 4 standard units [Port 1 is dedicated for the standard stylus (for calibration purpose)]

- Expandable to max. 10 ports. Note, all styli should be arranged on the same axis.

Configuration

MPP-300 probe main unit

Damping oil

Connection air hose

Storage box

ø4X18mm stylus

ø4X50mm stylus

Extension L=30 mm

Extension L=50 mm

Extension L=100 mm

MS4-stylus knuckle

MS4-stylus center

Stylus tool

Allen wrench

Inspection certificate

MPP-300 Hardware Guide

Datasheet