快速支持
直接联系认证专家
Model: Seven2Go pro S9-Standard Kit
Manufacturer: Mettler Toledo-Switzerland
Origin: China
Specifications
- Measurement method : optical
- Dissolved oxygen:
Measuring range: 0.01 ... 50.00 mg / L (ppm)
Resolution: 0.01
Accuracy:
± 0.1 mg / L (in range 0 ... 8 mg / L)
± 0.2 mg / L (in range 8 ... 20 mg / L)
± 10% (in range 20 ... 50 mg / L)
Measuring units: mg / L, ppm
- DO saturation:
Measuring range: 0.1 ... 500.0%
Resolution: 0.1
Accuracy: ± 10%
- Pressure:
Measuring range: 500 ... 1100 mbar
Resolution: 1
Accuracy: ± 2%
Measuring units: mbar, hPa, mmHg, Atm
Offset function: Automatic / manual
- Temperature:
Measuring range: 0.0… 50.0 ° C
Resolution: 0.1 ° C
Accuracy: ± 0.2 ° C
Temperature update function: Automatic / manual
- Calibration:
Calibration point: 2 points
Calibrated buffers are pre-installed: 2
Measuring specifications:
Endpoint recording function (endpoint): Automatic / Manual
Allow recording endpoint (endpoint) over time
Notify on the display when the value reaches the end point (endpoint)
- Storage / data security:
LED signal on the screen, warning about the reliability of the measuring device
The ISM function identification of the electrode is displayed on the screen
- Allow updating time
- Choose working level (Expert, Routine, Outdoor)
- Memory: 200 results
- Review previous calibration results
- Allow setting ID for each model
- Alarm function when exceeding the usage limit (user can install)
- Install a protected PIN code
- Connection:
Electrode connector: BNC (10 12 Ω) / RCA (cinch)
- Connection port (printer, computer ...): Micro-USB (USB Device)
Other parameters:
Machine size: 222 x 70 x 35 mm
Weight: 290g
Power source: 4x 1.5 V AA or 1.3 V NiMH or USB
Working time: 250 ... 400 hours
Display: Graphic LCD display
Delivery contents:
- Main machine model Seven2Go pro S9
- 4 AA Batteries
- Electrodes holder
- Dissolved oxygen measuring electrode, Inlab OptiOx model
- Zero oxygen tablets
- USB cable
- LabX Direct pH software
- Certificate of the company
- User manuals
