快速支持
直接联系认证专家
Measuring item: CO, HC, CO₂, O₂, λ (air surplus rate), AFR, NOx (5-gas analyzer)
Measuring method:
CO, HC, CO₂: NDIR Method
O₂, NOx: Electrochemical Cell
Measuring range CO: 0.00 ~ 9.99%
Resolution CO: 0.01%
Display CO: 4 digit 7-segment LED
Measuring range HC: 0 ~ 15000 ppm
Resolution HC: 1 ppm
Display HC: 4 digit 7-segment LED
Measuring range CO₂: 0.00 ~ 20.0%
Resolution CO₂: 0.1%
Display CO₂: 4 digit 7-segment LED
Measuring range O₂: 0.00 ~ 25.00%
Resolution O₂: 0.01%
Display O₂: 4 digit 7-segment LED
Measuring range Lambda (λ): 0 ~ 2.000
Resolution Lambda: 0.001
Display Lambda: 4 digit 7-segment LED
Measuring range NOx: 0 ~ 5000
Resolution NOx: 1 ppm
Display NOx: Option
Repeatability: Less than ±2% FS
Response time: Within 10 seconds (more than 90%)
Warming up time: About 2 ~ 8 minutes
Sample collecting quantity: 4 ~ 6 L/min
Power: AC110V only or AC220V only ±10%, 60Hz
Part Composition
AC Power cable: 1EA
Spare Fuse: 2EA
Probe hose: 1EA
First filter: 5EA
Dust filter: 5EA
Probe filter: 10EA
Printer roll paper: 5EA
Calibration connecting hose: 1EA
PC S/W Program CD: 1EA
Ground terminal: 1EA
Probe: 1EA
Leak test cap: 1EA
Second filter: 5EA
Zero filter: 2EA
Printer ink cartridge: 1EA
Calibration controller nipple: 1EA
Operation Manual: 1EA
RS 232 Cable: 1EA
