Nguyên lý hoạt động của Máy đo màu

As of January 2026, EMIN has been officially authorized by Teledyne FLIR to distribute FLIR T&M products in Vietnam

Understand how PosiTector 200 uses ultrasonic echoes to measure coatings on non-metal substrates and when Max Thick Mode can help with rough or noisy surfaces.

A drywall coating thickness gauge helps evaluate coating uniformity and monitor the application process. This guide provides an overview of measuring dry film thickness on drywall using ultrasonic measurement, including how to interpret the results, handle rough surfaces, and measure areas containing joint compound.

A powder coating thickness gauge is a specialized instrument used to measure the thickness of powder coating on metal or non-metal surfaces, helping ensure coating quality and durability while minimizing material consumption. Measuring powder coating thickness at the right stage and using the appropriate measurement principle helps maintain coating quality, reduce rework, and optimize the finishing process.

A coating adhesion tester is an essential instrument for evaluating the quality of paints, varnishes, and protective coating systems. The coating must bond sufficiently well to the substrate or underlying coating layer to minimize peeling during use. Depending on the substrate material, coating system structure, test conditions, and evaluation objectives, operators can select from several adhesion test methods, including knife, tape, pull-off, and scratch tests.