NI cRIO-9803 Expansion Module for CompactRIO (mSATA SSD, 5 Gb/s, No Drive)

Software

Supported operating system NI Linux Real-Time (64-bit), Windows

USB Ports

Type: USB type-C, upward-facing (device) port

USB interface: USB 3.1 Gen1, SuperSpeed

Maximum data rate: 5 Gb/s

Maximum current from USB downward facing (host) port: 900 mA

Memory

Nonvolatile (SSD): Varies

Form factor: mSATA, full size

Maximum supported drive power: 2.9 W (875 mA @ 3.3 V)

Drive interface: SATA II

Read/write performance (sequential): 150 MB/s

Power Requirements

Maximum power consumption: 4.5 W (900 mA @ 5 V)

Power source: USB bus-powered

Physical Characteristics

Weight: 370 g (13 oz)

Dimensions: 30.0 mm × 88.1 mm × 106.9 mm (1.18 in. × 3.47 in. × 4.21 in.)

Expands the processor I/O from an NI controller to meet additional application requirements.

The Expansion Module for CompactRIO connects to the processor I/O, such as USB and Ethernet, of a controller to expand its functionality. This module works with CompactRIO Controllers, Industrial Controllers, CompactRIO Single-Board Controllers, and PXI Controllers to expand the capabilities of the system, such as adding additional storage for saving more data and increasing the number of USB or time-sensitive networking (TSN) Ethernet ports of the system. Additionally, the Expansion Module for CompactRIO features the same rugged shock and vibration ratings as other CompactRIO modules, and you can can mechanically connect it to a controller for integration using mounting accessories.

Datasheet