快速支持
直接联系认证专家
RTD Type: 100 Ω pt or Jpt sensor; 3-wire Pt100
Input Type: Thermocouple, RTD, mA, Voltage
Form factor: 1/16 DIN
form-factor: 1/16 DIN
Altitude,Max: 2000 m
Control Mode: PID Control, Fuzzy Control, Self-tune, Manual tuning, On-off control
Display Type: 3.5 Digit LCD
Output Detail: DC Pulse;Voltage pulse output: 12Vdc, Max. output current 40mA;Alarm Output - Relay output: Max. load 250Vac, 3A resistive load
Output Signal: None
Ramp and Soak: Multiple Ramp & Soak
Sampling Rate: 10 Hz (10 updates/second)
Control Output: DC pulse, SPDT Relay
Data Interface: RS485
Supply Voltage: 24 Vac/Vdc
Measuring Range: Type K: -200 ~ 1300°C, Type J: -100 ~ 1200°C, Type T: -200 ~ 400°C, Type E: 0 ~ 600°C, Type N: -200 ~ 1300°C, Type R: 0 ~ 1700°C, Type S: 0 ~ 1700°C , Type B: 100 ~ 1800°C, Type L: -200 ~ 850°C, Type U: -200 ~ 500°C, Type TXK: -200 ~ 800°C, RTD (JPt100): -20 ~ 400°C, RTD (Pt100): -200 ~ 850°C, Resistance (Ni120): -80 ~ 300°C, Resistance (Cu50): -50 ~ 150°C, Analog Voltage Input (0~5V): -999~9999, Analog Voltage Input (0~10V): -999~9999, Analog Voltage Input (0~20m A): -999~9999, Analog Voltage Input (4~20m A): -999~9999, Analog Voltage Input (0~50m V): -999~9999
Measurement Type: Current, Temperature, Voltage
Number of Inputs: 1
Shock Resistance: Max. 300m/ s² , 3 times in each 3 axes, 6 directions
Display Type Note: LCD display. Process value (PV): Yellow color, Set point (SV): Green color, 3.5 Digit Dual Display Display Accuracy: 0 or 1 digit to the right of the decimal point (selectable)
Relative Humidity: 35% ~ 80% RH（non-condensing）
Supply Power Note: 80 ~ 260Vac 50/60Hz; 24Vac 50/60Hz ± 10%; 24 Vdc ± 10%
Supply Power Type: DC
Thermocouple Type: J, K, T, E, N, R, S, B, L, U, TXK
Sampling Rate Note: Analog input: 0.1 sec/scan; Thermocouple or Platinum RTD: 0.1 sec/per scan
Vibration Resistance: 10 to 55Hz, 10m/s² for 10min, each in X, Y and Z directions
Storage Temperature, Max: 65 °C
Storage Temperature, Min: -20 °C
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
