快速支持
直接联系认证专家
Width: 0.8 in
width: 0.8 in
Height: 2.4 in
Length: 2 in
Accuracy: Class C3
Approvals: OIML R60
Dead load: 0% FS
Linearity: ± 0.035%
Materials: Stainless Steel
Force Type: Compression, Tension
Hysteresis: ± 0.035%
Cable Length: 0 ft
Overload, Max: 300% FS
Repeatability: ± 0.035%
Safe Overload: 150% FS
Load Cell Type: S-beam
Supply Voltage: 5 to 12 Vdc
Input Resistance: 430 ± 50 Ω
Electrical Output: 3 mV/V
Enclosure Ratings: IP67
Output Resistance: 351 ± 2 Ω
Supply Power Note: 5 to 12 Vdc, 18 Vdc max
Calibration Option: 2 POINT NIST
Load Cell Capacity: 500 lbF
Zero/Balance Error: ± 1%
5-Point Calibration: 0%, 100%
Electrical Connection: MIL-26482-I 10-6P
Full Scale Deflection: 0.0317 in
Insulation Resistance: ≥ 5000 MΩ
Wiring/Connector Table: Pin A: (+) Output; Pin B: (-) Output; Pin C: (-) Input; Pin D: (+) Input; Pin E: Not Connected; Pin F: Not Connected
Process Temperature, Max: 40 °C
Process Temperature, Min: -10 °C
Storage Temperature, Max: 70 °C
Storage Temperature, Min: -40 °C
Operating Temperature, Max: 65 °C
Operating Temperature, Min: -35 °C
Number of Load Cell Intervals (nLC): 3000
Ratio of Minimum LC Verification Interval (Y = Emax/vmin): 10000
