快速支持
直接联系认证专家
Height: 21 mm
Weight: 31 g
Accuracy: ± 5 µA
Diameter: 43 mm
RTD Type: Pt100
Approvals: BS EN 61326 ; 1998 – Electrical equipment for measurement and control ANNEX A ; ANNEX F
Span, Min: 25°C
Input Type: RTD
Calibration: Pushbutton
Output Load: [(Vsupply-10)/20] kΩ
Sensor Type: Transmitter
Probe Length: 0 mm
Warm Up Time: 1 min to full accuracy
Accuracy Note: (mA output/2000) or 5 uA (whichever is the greater)
Output Detail: 2 wire, 4 to 20 mA current loop Maximum Output: 21.5 mA (in high burnout condition) Minimum Output: 3.8 mA (in low burnout condition)
Response Time: 1 sec
Start Up Time: I out < 4 mA during start up
Humidity Range: 10 to 90% RH non condensing
Input Accuracy: ± 0.1 °C
Setup Controls: Pushbutton, Program LED will flash in bursts
Supply Current: <200 µA
Supply Voltage: 10 to 30 Vdc
Sheath Material: N/A
Thermal Effects: 1 uA/°C, 25 ppm/°C
Update Rate, Max: 500 ms
Electrical Output: 4 to 20 mA
Supply Power Type: DC
Thermocouple Type: N/A
Self Heating Effect: 0.2 uA/V
Input Control Signal: N/A
Lead Resistance, Max: 20 Ω per leg
Electrical Connection: Screw Terminal
Lead resistance effect: 0.002°C/Ω
Programmable Functions: offset, Range, Sensor Burnout Indication
Wiring/Connector Table: 2- or 3-Wire
Temperature Coefficient: 0.00385 Ω/°C
Temperature Input Range: -200 to 850°C
Storage Temperature, Max: 90 °C
Storage Temperature, Min: -50 °C
Operating Temperature, Max: 85 °C
Operating Temperature, Min: -40 °C
