PEGO CSS-20P1 电压跌落和短时中断发生器 (Single phase 220V/20A ( 2 regulators))

Control and display mode: LCD+touch screen

Load capacity: Single phase 220V/20A ( 2 regulators)

Voltage dips: 0~265V±10% (1V step), the upper limit is limited by the grid voltage

Rated voltage: 90~265V±10% (1V step), the upper limit is limited by the grid voltage

Rise (and fall) initial phase: 0~359°(1°step)

Rise (and fall) end phase: 0~359°(1°step)

IEC level built in: Voltage rise (and fall) 0%, 40%, 70%, 80%, 120% of UT

Trigger mode:

COUNT: Count according to the set value of the falling (rise) cycle

50ms: Each cycle generated by the simulator includes three rises (and falls), and the time interval between these three rises (and falls) is 50ms

Duration for voltage dip: 1~9999ms

Interval for voltage dip: 1~9999ms

Rise (and fall) cycles: 1~9999 times

Working condition: Temperature:10℃~35℃ Humidity: 30%~60%

Power: Single phase, AC220V±10%,50/60Hz

Weight: Approximate 100kg

Voltage dips and short interruption generator is designed according to IEC6100-4-11, it is to simulate   effects of abrupt voltage change, includes voltage dips and short interruption. The voltage dips and short interruption immunity tests are applied to electrical and electronic equipment having a rated input current not exceeding 16A per phase, and for connection to 50Hz or 60Hz AC networks. This is a basic EMC test to assess the immunity of equipment or a system against the voltage dips and short interruptions caused by fault in the network, primarily short circuits, in installation or by sudden large changes of load.