PEGO IPX12C-800 IPX1 和 IPX2 防滴测试设备 (800*800, 1000*1000*2500 (D*R*C))

Drip board size (mm): 800*800

Outer size (mm): 1000*1000*2500 (L*W*H)

Diameter of turntable: Φ500mm

Aperture of nozzle: Φ0.4mm

Grid pattern: 20*20mm

Delivery rate: 1~5mm/min (±0.5mm/min)

Adjust mode: Manual adjustment

Lifting height of drip board: 1000~1800mm (adjustable)

Bearing: 50KG

Rotation speed of turntable: 1r/min

Tilt angle of turntable: 0⁰ or 15⁰ in 4 positions

Lifting height of turntable: fixed

Test time: 0~999min

Protection device: Electric leakage, hydropenia, short circuit

Working power: 220V, 50Hz/60Hz, 1KW

IPX1 and IPX2 vertical rain drip box waterproof testing equipment can meet the test requirements of IEC60529 clause 14.2.1 and 14.2.2. It is to simulate the conditions of vertically dripping and dripping with 15 degrees tilted. And to verify if the products (electronics, luminaire, electric components, auto parts, EVCS and etc.) can meet the relative product standards. The drip board can be customized as per the specimen.

The drip box is for IPX1 and IPX2 testing, the drip board size is 800*800mm, and the aperture of nozzle is Φ0.4mm, distant of drip nozzle is 20mm, sample can be over 50kg.

The IPX1 waterproof testing equipment request the dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm / minute.

The IPX2 waterproof testing equipment request Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt). Water equivalent to 3 mm/minute.