快速支持
直接联系认证专家
Channels: 4
Vertical resolution: 12 bits (16 bits in enhanced resolution mode)
DC accuracy: ±1% of full scale (2% on 50mV range)
Sensitivity: 10 mV/div to 40 V/div
Input ranges (full scale): ±50 mV to ±200 V in 12 ranges
Input impedance: 1 MΩ in parallel with 24 pF
Input type: Floating single-ended PicoBNC+ connector
Input coupling: Software selectable AC/DC
Input overvoltage protection: ±250 V (DC + AC peak)
Buffer memory: 250 M samples shared between active channels
Waveform buffer: Up to 10,000 waveforms
Timebase ranges: 5 ns/div to 5000 s/div
Bandwidth: 20 MHz (10 MHz on ±50 mV range)
Maximum sampling rate (single shot)
1 channel in use: 400 MS/s
2 channels in use: 200 MS/s
3 or 4 channels in use: 100 MS/s
TRIGGERS
Source: Any input channel
Basic triggers: Auto, repeat, single, none
Advanced triggers: Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, windowed, logic
Maximum pre-trigger delay: Up to 100% of capture length
Maximum post-trigger delay: Up to 4 billion samples
SPECTRUM ANALYZER
Frequency range: DC to 20 MHz
Display modes: Magnitude, peak hold, average
ENVIRONMENTAL
Operating temperature range: 0 °C to 40 °C (15 °C to 30 °C for quoted accuracy)
Operating humidity range: 5% to 80% RH, non-condensing
Storage temperature range: -20 to +60°C
Storage humidity range: 5 to 95% RH, non-condensing
PHYSICAL CHARACTERISTICS
Dimensions: 190 x 160 x 40 mm (approx 7.5 x 6.3 x 1.6 in)
Weight: <900 g (approx 2 lb)
GENERAL
Additional accessories (supplied) USB cable and Safety Guide
PC interface USB 3.0 (USB 2.0 compatible)
Power requirements Powered from USB port
