PW Instruments PW-UCS126-40-3S Multi-Station Tensile Test Chamber (1 kN)

Maximum Capacity: 1 kN (optional 10 N~1 kN force sensor)

Control Method: Full computer-controlled operation with powerful software

Unit of Force: N, kN, gf, kgf, lbf, kP, tf (SI), tf (long)…

Unit of Length: mm, cm, Inch, m, km, um…

Force Resolution: 1/1,000,000

Accuracy: ±0.1%

Stroke Resolution: 1/1,000,000

Sensor Accuracy: 3/10,000

Test Space: 600350620 mm (W×D×H)

Speed Range: 0.01~500 mm/min (customizable)

Temperature Range: -40~150℃

Humidity Range: 20%~98% (optional)

Shutdown Mode: Overload stop, emergency stop button, automatic stop when the test specimen breaks, automatic stop at preset upper and lower limits

Machine Drive: Servo motor

Machine Dimensions: Approximately 1050x930x2600 mm (W×D×H)

Machine Net Weight: Approximately 300 kg

Power: 400 W

Power Supply: 220 V, 50~60 Hz

Machine Accessories: 1 network communication cable, 1 software

Optional Accessories: Computer, peel-off steel sheets, rolling wheels, other peel-off fixtures

PRODUCT DETAILS

Multi-station tensile test chamber Application:

The machine is specially improved for environmental testing.The tensile machine is equipped with a high and low temperature test box，which can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance in different temperature environments. When using the room temperature test, the high temperature box can be removed to increase the use of space and convenience.

Multi-station tensile test chamber Software Functions:

The measurement and control system is the latest system developed in 2020, also known as the international version, which could test three groups of samples at the same time, with the same interface, independent curves and independent data for easy comparison. It reflects the latest requirements of global users for testing machines; it is powerful and easy to use in all aspects such as language conversion and automatic translation of test data, unit conversion, standard management, specimen shape management, tester management, data processing and report generation. Net 2005, with powerful functions and friendly interface, is the development tool for the new generation of operating system Windows XP / Vista; it meets the use of more than 90% of the world’s regions and population, and fully supports the internationalisation requirements of tester manufacturers and users.