快速支持
直接联系认证专家
Carbon Dioxide Sensor Type: Solid-state Infrared
CO2 Minimum Detection Limit: 0.1% (0-50% or 0-100% range) or 0.01% (0-10% or 0-20% range)
Accuracy - Carbon Dioxide: ± 1% of reading, or ± 0.1% CO2 (whichever is greater)
CO2 Calibration Controls: Digital Keypad
CO2 Calibration Frequency: Every 12 months; calibration gas recommended.
Oxygen Range: 0.00 to 100%
Oxygen Sensitivity: 0.0001
O2 Resolution: 0.0001
Expected Lifetime (oxygen): 4-5 years
Analog Output: 0-5V
Resolution: 0.0001
Accuracy: +/- 0.1% (from 0-20%), +/- 0.2% (from 20% to 50%), +/- 0.5% (from 50% to 100%)
Drift: less than 0.4% per year
Oxygen Sensor Type: Proprietary Electochemical
Response Time: 20 seconds to T95
O2 Sensor Lifetime: 4-5 Years
O2 Sensor Body: Anodized aluminum (CO2) and ABS Resin (O2)
Sample Connection: Sample Probe
Sample Method: Pump
Sample Pump: Internal, draws ~5cc/sec
Pump Timing: 2-20 seconds, continuous, or cycling on/off, programmable
Minimum Sample Required: 15cc
Sampling Assembly: Probe with luer connection for tri-beveled needle, PTFE tubing
Oxygen Calibration Controls: Digital Keypad Adjustment
Instrument Calibration: EasyCal calibration
Exhaust port: Vents to air
Power Supply: 100 to 240 VAC, internationally compatibile
Battery Operation: Included, internal shrink wrapped NiMH battery pack
Input Voltage: 100-240V, 50-60Hz
Battery Life: 12-16 hour runtime
Measures: O2, CO2: O2, CO2
Form Factor: Benchtop
Size: 11W x 3H x 8D in (279W x 76H x 203D mm)
Weight: 3.5 lbs (1.59 kg)
Standards: CE, RoHS
Included Consumables: 400 foam septas, 10 luer fit needles, 10 filters, spare probe tubing
Included Documentation: Owner’s manual, NIST traceable calibration certificate
Including
Model Q32 Analyzer
Power Supply for Charging
400 Foam Seal Pads (P/N 9002)
10 Liquid and Particulate blocking filters (P/N 9028)
10 needles (P/N 9027)
Spare tubing for sample probe
USB thumb drive for downloading saved data points
