快速支持
直接联系认证专家
Performance
-Measurement range:
–100 to +20°C dew point
–110 to +20°C dew point
Accuracy: ±2°C dew point
Response time: 5 mins to T95 (dry to wet)
Repeatability: 0.5°C dew point
Calibration: Traceable 7-point calibration certifi cate
-Electrical Specifications
Output signal: 4–20 mA (2-wire connection, current source); User confi gurable over range
Output: Dew point or moisture content for ppmV
Analog output scaled range:
Dew point: –100 to +20°C
Moisture content in gas: 0–3000 ppmV
Non-standard available upon request
Supply voltage: 12 to 28 V DC
Load resistance: Max 250 Ω @ 12 V (500 Ω @ 24 V)
Current consumption: 20 mA max
CE marked: Certified
-Operating Specifications
Operating temperature: -40 to +60°C
Compensated Temperature Range: -20 to +50°C
NOTE: The transmitter accuracy statement is only valid for the temperature range: -20/+50°C
Storage Temperature: -40 to +60°C
Operating pressure: 45 MPa (450 barg) maximum
Overpressure rating: x2 operating pressure 90 MPa (900 barg)
Flow rate: 1 to 5 Nl/min mounted in standard sampling block; 0 to 10m/sec direct insertion
-Mechanical Specifications
Ingress protection:
IP66 in accordance with standard
BS EN 60529:1992,
NEMA 4 in protection accordance with standard
NEMA 250–2003
Hazardous area certificates:
ATEX: II 1 G Ex ia IIC T4 Ga (–20°C to +70°C)
IECEx: Ex ia IIC T4 Ga (–20°C to +70°C)
TC TR: 0Ex ia IIC T4 Ga (–20°C to +70°C)
FM: Class I, Division 1, Groups A B C D, T4
cCSAus: Class I, Division 1, Groups A B C D, T4
Housing material: 316 stainless steel
Dimensions: L=132mm x ø45mm (with connector)
Filter (sensor protection):
Standard: HDPE Guard <10μm
Optional: 316 stainless steel sintered guard <80μm
Process connection and material:
5/8"- 18 UNF
Alternatives: G1/2" BSP or 3/4"- 16 UNF
316 stainless steel
Weight: 150g
Interchangeability: Fully interchangeable transmitter
Electrical connections: Hirschmann GDS series (DIN 4350-C)
