直接联系认证专家

Output Voltage: 0~100kV
Power Distortion Rate: <3%
Booster Capacity: 1.5kVA
Boosting Speed: 0.5~5.0kV/s (Adjustable)
Resting Time: 15 minutes
Boost Interval: 5 minutes
Number of Boost: 1~9
Supply Voltage: AC220V ±10%
Power Frequency: 50Hz
Power Consumption: 200W
Operating Temperature: 0~45℃
Relative Humidity: ≤75%RH
Dimension: 465×385×425mm
Features about the Transformer Oil Dielectric Test Equipment
The Oil BDV test is
1.This instrument uses a microprocessor to complete operations such as boosting, holding, stirring, static release, calculation, printing automatically., and can perform oil circulation pressure test within the range of 0-100KV.
2.Large-screen LCD display
3.Simple operation, the operator only needs to make simple settings, and the instrument will automatically complete the pressure test of 1 cup of oil sample according to the settings. The breakdown voltage value and cycle times of 1 to 6 times are automatically stored. After the test is completed, the printer can print out the breakdown voltage value and average value of each time.
4.Power-off retention, test results storage up to 100 sets, and can display the current ambient temperature and humidity.
5.The single-chip microcomputer is used to boost the voltage at a constant speed, and the voltage frequency is accurate to 50HZ, which makes the whole process easy to control.
6.With over-voltage, over-current, limit protection, etc., to ensure the safety of operators.
7.With temperature measurement display function and system clock display.
8.Standard RS232 interface, which can communicate with computer.