Run Test RUN-PD100K Ultrasonic measurement switch cabinet partial discharge tester (10-100MHz)

Display: 4.3-inch true color TFT LCD touch screen

Input Signal Channel: TEV *1, Air-coupled ultrasonic *1

Power Socket: DV 12V

Headphone Jack: 3.5mm

Storage: TF Card supported

Battery: 12V 2500mAH

Operating hours: >4h

Dimension: Instrument Box:240*240*80 mm  Handle Dimension:146*46.5*40 mm

Weight: <1kg

TEV Measurement: 

Sensor Type: Capacitive Coupling

Sensor Specifications: Built-in

Frequency Range: 10-100MHz

Measuring Range: 0-50dB

Accuracy: ±1dB

Resolution: 1dB

Ultrasonic Measurement: 

Sensor Type: Air Coupling

Sensor Specifications: Built-in

Resonance Frequency: 40kHz±1kHz

Measuring Range: -10dBuV-70dBuv

Sensitivity: -68dB（40.0kHz，0dB=1 Volt/μbarrms SPL）

Accuracy: ±1dB

Resolution: 1dB

Other Specification: 

Normal working hours: > 4 Hours

Battery protection: lease recharge when battery is low

Rated Voltage: 100-240V

Charging Voltage: 12V

Charging Current: 0.5A

Time Required to fully charge: 7 Hours

Operating Temperature: 0-55℃

Portable Hand Held Pd Detector Partial Discharge Tester

The instrument adopts a portable design, which can scan and detect directly on the switch cabinet shell without any influence or damage to the operation of the switch cabinet. At the same time, the measured signal can be stored and replayed on the TF card for easy reference, and the supplied earphones can be used to hear sound of electric discharge.

Application for Partial Discharge Testing Set

Partial discharge usually occurs where the wire insulation is damaged. It can cause short circuits and fires, resulting in destructive fatal failures. The most dangerous situation is the poor isolation of the external as a whole, and the gradual collapse leads to unexpected equipment failures. Therefore, continuous or regular monitoring of high-voltage equipment and timely detection of partial discharge are very important.

Partial discharge detectors are widely used in the measurement of partial discharge of various high-voltage electrical products such as transformers, transformers, high-voltage switches, zinc oxide arresters, power cables, etc., product type tests, insulation operation supervision, etc.