快速支持
直接联系认证专家
0~100HA
• Typical application: measurement of
penetration (Shore)
• Particularly recommended for internal comparison
measurement. Standard calibrations
e.g. to DIN 53505 are often not possible
because of very narrow standard tolerances
• Shore A: rubber, elastomers, neoprene,
silicone, vinyl, soft plastics, felt, leather and
similar material
• Shore D: plastics, formica, epoxides,
plexiglass etc.
• Shore A0: foam, sponge etc.
• Max mode: Holds the maximum value in the
display
• Point mode: Shows one instant value
• Can be attached to the test stands SAUTER
TI-AC. (for Shore A and A0),
TI-D. (for Shore D)
• Delivered in a wooden carrying case
