HD2070.HA-WB Measure Vibrations
Vibration analysis equipment set and assessment from manual and whole-body measurement systems according to ISO 5349 and ISO 2631
The Equipment Kit includes the following equipment:
- HD2070.K1 – 3-channel vibration analyzer
The K1 3-channel vibration analyzer for IEPE accelerometers complies with ISO 8041, ISO 2631, ISO 5349 and IEC 61260 standards.
• Measure the vibrations transmitted to the arm system and to the whole body with the Fa, Fc and Fz band filters and the Wb, Wc, Wd, We, Wj, Wk, Wh, Wm filters complying with the ISO 8041, ISO 2631 and ISO 5349 requirements.
• Data recording function with 8 MB memory and SD card.
• Octave bands from 0.5 Hz to 2 kHz and third octave bands from 0.3 Hz to 3.2 kHz real-time spectral analysis of acceleration according to IEC 61260 with calculation of velocity and shift ("Spectral Analysis Options").
• Statistical analysis with probability distribution plot, calculation and graphical display of percentage levels from L1 to L99 ("Statistical analysis options<").
• Digital recording of accelerometer signals ("Digital recording option").
• Record vocal comments related to measurements. • Measuring range 110 dB, li...
- HDP356A02 – ICP three-axis accelerometer
ICP three-axis accelerometer to measure vibrations transmitted to the arm-arm system.
Sensitivity 10 mV/g Range ±500 g pk
Weight 10.5 g 10-32 UNF 1/4-28 threaded hole 4-pin connector Includes:
• 081B05 10-32 Copper-beryllium alloy mounting screw UNF • M081B05 Copper-beryllium alloy mounting screw M6
• ACS-1T Manufacturer's calibration card
The accelerometer is connected to the right (three-axis) input of the analyzer via the HD2030CAB3-xxM cable (not included).
- HD2030.CAB3-3M – connection cable for HDP356A02
HD2030. CAB3-3M cable for connecting the three-axis accelerometer to the right input of the analyzer. 3 m length and connectors:
• Accelerometer face: 4 pins 1/4-28
• Instrument side: round 4-pin connector
HD2030. CAB3-3M cable for connecting the three-axis accelerometer to the right input of the analyzer.
3 m length and connectors:
• Accelerometer face: 4 pins 1/4-28
• Instrument side: round 4-pin connector
- HD2030.124 – Hand-arm adapter
Hand-arm adapter includes:
• HD2030AC1: cube adapter for anatomical handles and small sized instruments. The adapter must be securely attached to the handle using a plastic cable tie or metal clip (included).
• HD2030AC2: adapter for cylindrical handle. The transducer is placed horizontally relative to the hand.
• HD2030AC4: general purpose adapter. The accelerometer is placed between the index finger and middle finger or between the middle finger and ring finger.
- HD2030MSP – IEPE three-axis accelerometer with seat adapter to measure vibration transmitted to the whole body
IEPE three-axis accelerometer with seat adapter to measure vibration transmitted to the whole body. Complete with HD2030PAD seat cushion.
Sensitivity 1 V / g Range ±5 g pk
Weight 250 g Threaded hole 10-32
4-Pin UNF M5 Connector Includes:
• HD2030PAD rubber seat conversion conforms to UNI EN 30326-1 standard
• Installation kit for HD2030PAD and HD2030AC5
• Mounting screws 10-32 Copper-beryllium alloy UNF (HD6200) • Calibration chart
The accelerometer can be connected to the right input (three axis) of the HD2070 or HD2030 analyzer using the HD2030CAB3M-xxM cable (not included) or to any IEPE compliant analyzer with BNC Input with
- HD2030.CAB3M-2M – Connection cable for HD2030MSP
HD2030. CAB3M-2M cable for connecting three-axis accelerometer to 4pin M5 connector.
2m length, equipped with the following connectors:
• Accelerometer face: 4-pin M5 multipole
• Tool side: multi-pole circular push-pull 4-pin connector
