SENSOREX DO1200/T 溶解氧传感器（DO） (0~20 mg / L)

Range: 0-20 mg/L
Body Material: Epoxy and Noryl
Max Temperature: 50 Degrees C
Saturation Output: HDPE  =  47mV  +/-  9mV, PTFE = 33mV+/-9mV                                                                                                                                                
Pressure: 0-100 psig (7.5 Bar)                                    
Calibration: Single point in air                               
Single point in air
Response Time: After Equilibration, HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV
+ DO1200: DO sensor, 12mm, Hand held, HDPE or PTTE

Datasheet