Range: 0-20 mg/L
Body Material: Epoxy and Noryl
Temperature: 0~50⁰ C
Saturation Output: HDPE = 47mV +/- 9mV; PTFE = 33mV+/-9mV
Pressure: 0-100 psig (7.5 Bar)
Calibration: Single point in air
Response Time: After Equilibration, HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV
Standard cable length:0.75m with a tinned lead
Body Material: Epoxy and Noryl
Temperature: 0~50⁰ C
Saturation Output: HDPE = 47mV +/- 9mV; PTFE = 33mV+/-9mV
Pressure: 0-100 psig (7.5 Bar)
Calibration: Single point in air
Response Time: After Equilibration, HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV
Standard cable length:0.75m with a tinned lead
快速支持
直接联系认证专家