Shinho X910 芯对芯对准光纤熔接器

Applicable fiber: SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655), EDFA, others(including G.657)

Diameter of cladding: 80 -150μm

Diameter of coating: 160-3000μm

Typical splice loss: SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB

Return loss: ＞ 60dB

Fibe cleaved length: 5-16mm ( coating diameter ＜ 250um), 16mm (coating diameter:250-1000um)

Splicing program: 40 groups

Operate mode: Automatic/Manual

Auto-heating: Available

Typical splicing time: 6 seconds

Typical heating time: 18 seconds for 60mm and 40mm shrinkable sleeves

Fiber magnification: 250X (X or Y view), 125X (X and Y view)

Display screen: 2 CMOS cameras, 5.0 inch color LCD monitor

Records storage: 8000 groups data and 100 groups image

Loss evaluation: Available

Tension test: >2.2N

Interface: GUI menu interface, easy for operation

Battery: 5200mAh Li-battery, typical 300 cycles splicing and heating, suppport separating charging, operating time more than 5 hours, discharging time more 8 hours

Power supply: Adapter, input: AC 220±30V(50/60HZ), output:DC 12±2V

Electrodes life: More than 5000 ARC discharges, can be replaced conveniently

Ternimal: USB2.0 port, for uploading splicer results and upgrading software 

Operating conditions: Altitude: 0-5000m, Humidity: 0-95%,Operating Temperature: -25℃~+50℃, Storage temperature -40℃~+80℃；Wind speed: Max 15m/s

Dimension: 156mm(L) * 141mm(W) * 156mm(H) (including rubber armor)

Weight: 2.45kg (including battery)