快速支持
直接联系认证专家
Manufacturer: SOLO
Model: SMOKESABRE-01-001
Origin: Netherlands
Warranty: 12 months
More tests per can
Faster detector activation and clearing
Lowest cost per test
The end of harmful residue – risk is designed out with the sabre
Silicone free testing
Eco-responsibility 100% bio-degradable sabre, ozone friendly, no CFCs and low GWP
Detector manufacturer endorsement
UL and ULC listed
150ml can
include: 1 x SMOKESABRE
Smoke Sabre Hand Held Smoke Detector Tester 150ml
Smoke Sabre is a major step forward in the design of smoke detector testers.
All other pressurized aerosol smoke alarm testers have the inherent drawback that, if misused,
they leave harmful residue on the casing and / or inside the chamber of the detector.
This residue can discolour the detector plastic, can attract dust, affect sensitivity and, in some cases,
lead to corrosion, cracking or even complete failure of the detector. Residue occurs when testing aerosols
are used too close to the detector, or smoke alarm, despite instructions not to do so. Smoke Sabre cannot
be used too close to the detector and eliminates harmful residue while focusing and targeting the canned smoke test gas.
When Smoke Sabre is in the closed position the sabre prevents access to the spray button.
The aerosol can only be activated when the sabre is fully extended. In use, air is drawn through the holes in the sabre and this,
coupled with the venturi effect involved, assists the velocity and vaporization process of the airborne 'smoke' particles.
The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while
eliminating harmful residue.
Datasheet
