快速支持
直接联系认证专家
Signal Output:
Output: 2-wire or 4-wire (remote sense); Output can be set to Ground or Float (250 V max.)
±1 V Range:
Full scale: ±1.010000 V
Resolution: 1 µV
Current: 50 mA (max.)
Accuracy:
24 hour: ±(7 ppm of setting + 2 µV)
90 day: ±(12 ppm of setting + 6 µV)
1 year: ±(25 ppm of setting + 10 µV)
Stability: 24 hour: ±(1 ppm of setting + 1 µV)
Temp. Co.: ±(1 ppm of setting + 1 µV) / °C (0 °C to 40 °C)
Noise (typ.): 0.5 µVrms (0.1 Hz to 10 Hz); 9 µVrms (10 Hz to 100 kHz)
±10 V Range:
Full scale: ±10.10000 V
Resolution: 10 µV
Current: 50 mA (max.)
Accuracy:
24 hour: ±(7 ppm of setting + 12 µV)
90 day: ±(12 ppm of setting + 20 µV)
1 year: ±(25 ppm of setting + 20 µV)
Stability: 24 hour: ±(1 ppm of setting + 3 µV)
Temp. Co.: ±(1 ppm of setting + 2 µV) / °C (0 °C to 40 °C)
Noise (typ.): 1.5 µVrms (0.1 Hz to 10 Hz); 12 µVrms (10 Hz to 100 kHz)
±100 V Range:
Full scale: ±101.0000 V
Resolution: 100 µV
Current: 25 mA (max.)
Accuracy:
24 hour: ±(8 ppm of setting + 120 µV
90 day: ±(12 ppm of setting + 200 µV)
1 year: ±(25 ppm of setting + 200 µV)
Stability: 24 hour: ±(1 ppm of setting + 20 µV)
Temp. Co.: ±(1 ppm of setting + 15 µV) / °C (0 °C to 40 °C)
Noise (typ.): 12 µVrms (0.1 Hz to 10 Hz); 50 µVrms (10 Hz to 100 kHz)
Voltage Scanning:
Scan rate: 100 ms to 9999.9 s
Scan type: Ramp or triangle wave, continuous or single shot
Triggering: Scans can be triggered using the rear-panel trigger input, from the front panel, or over one of the computer interfaces
Remote Interfaces:
USB: Virtual COM port with FTDI drivers, 115.2k baud, 8 bits, no parity, 1 stop bit, RTS/CTS flow
RS-232: DB-9 connector, 9600 baud
Fiber Optic: Connection to SX199 Optical Interface Controller. Provides isolated connectivity to GPIB, RS-232 and Ethernet
General:
Operating temp.: 0 °C to 40 °C, non-condensing
Power: <30 W, 100/120/220/240 VAC, 50 Hz or 60 Hz
Dimensions: 8.3" × 3.5" × 13.0" (WHL)
Weight: 10 lbs.
