快速支持
直接联系认证专家
Output Frequency: 240 MHz
Analog Bandwidth: Up to 230 MHz
Sample rate: 10 MS/s to 600 MS/s
Resolution: 14 bit
Sin (x)/x (–1 dB): 150 MHz
Sin (x)/x (–3 dB): 260 MHz
Display Characteristics: LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA
Power Supply: 100 to 240 V AC, 47 to 63 Hz
Consumption: 450 Watts
Dimension: 245 x 465 x 500 mm
Weight: 19.5 kg
Include: Accessory pouch, front cover, USB mouse, compact USB keyboard, lead set for DC output, AWG5000C Series product software CD and instructions, documentation CD with browser, Quick Start User Manual and registration card, Certificate of Calibration, and power cable.
Datasheet
Option:
SMA Cable 40 in. (102 cm): 012-1690-xx
SMB Cable 20 in. (51 cm): 012-1503-xx
Rackmount Kit Rackmount Kit with Instruction: 016-1983-xx
Front Removable HDD Bay Front Removable HDD Bay: 016-1979-xx
Definitions
|
Specifications (not noted) – Product characteristics described in terms of specified performance with tolerance limits which are warranted/guaranteed to the customer. Specifications are checked in the manufacturing process and in the Performance Verification section of the product manual with a direct measurement of the parameter.
Typical (noted) – Product characteristics described in terms of typical performance, but not guaranteed performance. The values given are never warranted, but most units will perform to the level indicated. Typical characteristics are not tested in the manufacturing process or the Performance Verification section of the product manual.
Nominal (noted) – Product characteristics described in terms of being guaranteed by design. Nominal characteristics are non-warranted, so they are not checked in the manufacturing process or the Performance Verification section of the product manual. |
General Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Digital to Analog Converter |
|||
|
Sample rate |
10 MS/s to 1.2 GS/s |
10 MS/s to 600 MS/s |
|
|
Resolution |
14 bit |
||
|
Sin (x)/x Roll-off |
|||
|
Sin (x)/x (–1 dB) |
300 MHz |
150 MHz |
|
|
Sin (x)/x (–3 dB) |
520 MHz |
260 MHz |
|
Frequency Domain Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Output Frequency Characteristics |
|||
|
Effective Frequency Output |
Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR/2.5" |
||
|
Fmaximum |
480 MHz |
240 MHz |
|
|
Fmaximum (typical) |
540 MHz |
275 MHz |
|
|
Effective Frequency Switching Time |
Minimum frequency switching time from selected frequencies F1 to F2 is determined as "1/Fmaximum" |
||
|
Standard |
|||
|
Ts |
2.1 ns |
4.2 ns |
|
|
Ts (typical) |
1.8 ns |
3.7 ns |
|
|
Modulation Bandwidth |
Modulation bandwidth is a combination of sin(x)/x and rise time bandwidths, defined as the lower of the sin(x)/x bandwidth or the calculated percentage of rise time bandwidth (as shown) |
||
|
Mod bandwidth (–1 dB) (typical) –1 dB BW = 0.932 × (–1 dB TrBW) |
Normal: Up to 130 MHz Direct: Up to 180 MHz |
Normal: Up to 100 MHz Direct: Up to 130 MHz |
|
|
Mod bandwidth (–3 dB) (typical) –3 dB BW = 0.913 × (–3 dB TrBW) |
Normal: Up to 230 MHz Direct: Up to 300 MHz |
Normal: Up to 180 MHz Direct: Up to 230 MHz |
|
|
Output Amplitude Characteristics |
|||
|
Amplitude |
Amplitude levels are measured as single-ended outputs. Amplitude level will be 3 dBm higher when using differential (both) outputs |
||
|
Range |
Normal: –30 dBm to 17 dBm Direct: –30 dBm to 0 dBm |
||
|
Resolution |
0.01 dB |
||
|
Accuracy |
At 0 dBm level, with no offset, ±0.3 dB |
||
|
Output Flatness |
Mathematically corrected for characteristic Sin (x)/x roll-off, uncorrected by external calibration methods |
||
|
Flatness (typical) |
±1.0 dB, from 10 MHz to 480 MHz |
||
|
Digital Data Out (Option 03) |
|||
|
Number of outputs |
14-bit output on Ch1 and Ch2 (28 total) |
||
|
Output connector |
SMB (rear panel), single ended |
||
|
Output impedance |
50 Ω |
||
|
Digital Data Out Levels (into 50 Ω) |
|||
|
Window |
–1.0 V to 2.7 V |
||
|
Amplitude |
0.1 Vp-p to 3.7 Vp-p |
||
|
Resolution |
10 mV |
||
|
Accuracy |
±(10% of setting + 120 mV) |
||
|
Current (max) |
±54 mA per channel |
||
|
Rise/Fall time (20% to 80%) |
300 ps (1.0 Vp-p, Hi: 1.0 V, Lo: 0 V) |
||
|
Delay from marker |
–41 ns to –82 ns |
||
|
Skew between outputs |
<400 ps="" p=""> |
||
Time Domain Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Data Rate Characteristics |
|||
|
Data Rate |
Bit rate is determined as "sample rate / 4 points per cycle", allowing full impairment generation |
||
|
Bit rate (typical) |
300 Mb/s |
150 Mb/s |
|
|
Rise/Fall Time Characteristics |
|||
|
Rise/Fall Time |
Rise/Fall time measured at 10% to 90% levels |
||
|
Tr/Tf |
Normal: 1.4 ns Direct: 0.95 ns |
||
|
Rise Time Bandwidth |
Rise-time bandwidth converted from rise-time (0.34/Tr, assumed Gaussian transition) characteristics through analog output circuitry and cabling |
||
|
Tr bandwidth (–1 dB) (typical) |
Normal: 140 MHz Direct: 210 MHz |
||
|
Tr bandwidth (–3 dB) (typical) |
Normal: 250 MHz Direct: 370 MHz |
||
|
Low-pass filter |
Normal: Bessel Type, 50 and 100 MHz |
||
|
Output Amplitude Characteristics |
|||
|
Amplitude |
Amplitude levels are measured between differential outputs (+) and (–) For single-ended output (+) the amplitude level will be one-half the levels below |
||
|
Range |
Normal: 40 mVp-p to 9.0 Vp-p Direct: 40 mVp-p to 1.2 Vp-p |
||
|
Resolution |
1.0 mV |
||
|
Accuracy |
At 0.5 V, with no offset, ±(2% of amplitude ±2 mV) |
||
|
Offset |
|||
|
Range |
Normal: ±2.25 V |
||
|
Resolution |
1.0 mV |
||
|
Accuracy |
At minimum amplitude, ±(2.0% of offset ±10 mV) |
||
Common Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Output Distortion Characteristics |
|||
|
Spurious Free Dynamic Range (SFDR) |
SFDR is determined as a function of the directly generated carrier frequency. Harmonics not included |
||
|
SFDR (Direct) (typical) |
Clock: 1.2 GS/s, 14-bit operation Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 Vp-p) Offset: None |
Clock: 0.6 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Level: 4 dBm (1 Vp-p) Offset: None |
|
|
DC to 10 MHz carrier |
–70 dBc |
–74 dBc |
|
|
10 to 20 MHz carrier |
–70 dBc |
–70 dBc |
|
|
20 to 40 MHz carrier |
–62 dBc |
–62 dBc |
|
|
40 to 80 MHz carrier |
–62 dBc |
–57 dBc |
|
|
80 to 150 MHz carrier |
–58 dBc |
–54 dBc |
|
|
150 to 300 MHz carrier |
–58 dBc |
–54 dBc |
|
|
300 to 480 MHz carrier |
–56 dBc |
|
|
|
Spurious Free Dynamic Range (SFDR) |
When viewed as a modulation bandwidth and used with external frequency up-conversion, the specifications will hold and be independent of carrier frequency with proper conversion circuitry design. Harmonics not included |
||
|
SFDR (Direct) (typical) |
Clock: 1.2 GS/s, 14-bit operation Modulation Bandwidth: Up to 180 MHz Level: 4 dBm (1 Vp-p) Offset: None |
Clock: 0.6 GS/s, 14-bit operation Modulation Bandwidth: Up to 130 MHz Level: 4 dBm (1 Vp-p) Offset: None |
|
|
DC to 10 MHz bandwidth |
–70 dBc |
–74 dBc |
|
|
DC to 20 MHz bandwidth |
–70 dBc |
–70 dBc |
|
|
DC to 40 MHz bandwidth |
–62 dBc |
–62 dBc |
|
|
DC to 80 MHz bandwidth |
–62 dBc |
–57 dBc |
|
|
DC to 150 MHz bandwidth |
–58 dBc |
–54 dBc |
|
|
DC to 180 MHz bandwidth |
–58 dBc |
|
|
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Harmonic Distortion |
Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Normal: 10 dBm (2.0 Vp-p) Direct: 0 dBm (0.6 Vp-p) Offset: None |
Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Normal: 10 dBm (2.0 Vp-p) Direct: 0 dBm (0.6 Vp-p) Offset: None |
|
|
Harmonics |
Normal: <40 dbc="" p=""> Direct: <49 dbc="" p=""> |
Normal: <46 dbc="" p=""> Direct: <55 dbc="" p=""> |
|
|
Nonharmonic Distortion |
Clock: 1.2 GS/s, 14-bit operation Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 Vp-p) Offset: None |
Clock: 0.6 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Level: 4 dBm (1 Vp-p) Offset: None |
|
|
Spurious |
< –60 dBc |
||
|
Phase Noise |
Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Amplitude: 10 dBm (2 Vp-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset |
Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Amplitude: 10 dBm (2 Vp-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset |
|
|
Jitter |
|||
|
Random jitter (typical) |
1010 clock pattern |
||
|
RMS value |
Normal: 5.0 ps |
||
|
Total jitter (typical) |
215 – 1 data pattern (at 10–12 BER) |
||
|
Peak-Peak value |
Normal: 150 ps at 0.5 Gb/s |
||
Common Hardware Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Number of Outputs |
4 channels |
2 channels |
|
|
Output connector |
Differential, BNC (front panel) |
||
|
Output impedance |
50 Ω |
||
|
Waveform Length |
Standard – to 16M points Extended memory – to 32M points |
||
|
Number of Waveforms |
1 to 16,200 |
||
|
Sequence Length/Counter |
1 to 8,000 steps 1 to 65,536 count |
||
|
Run Modes |
|||
|
Continuous |
Waveform is iteratively output. If a sequence is defined, the sequence order and repeat functions are applied |
||
|
Triggered |
Waveform is output only once when an internal, external, programmatic (GPIB, LAN), or manual trigger is received |
||
|
Gated |
Waveform begins output when gate is "True" and resets when gate is "False" |
||
|
Sequence |
Waveform is output as defined by the sequence selected |
||
|
Jump |
Synchronous and asynchronous |
||
|
Sampling Clock |
|||
|
Resolution |
8 digits |
||
|
Accuracy |
Within ±(1 ppm + Aging) Aging: Within ±1 ppm per year |
||
|
Internal Trigger Generator |
|||
|
Range |
1.0 µs to 10.0 s |
||
|
Resolution |
3 digits, 0.1 µs minimum |
||
|
Output Skew Control |
|||
|
Range |
–5 ns to 5 ns |
||
|
Resolution |
5 ps |
||
Common Software Characteristics
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Operating System / Peripherals / IO |
Windows 7 4 GB memory CD/DVD drive (front panel) 300 GB Solid State Drive (std) / 1 TB Mechanical Hard Disk Drive (opt) (rear-panel removable, optional front mount kit) USB compact keyboard and mouse USB 2.0 compliant ports (6 total – 2 front, 4 rear) PS/2 mouse and keyboard connections (rear panel) RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T eSATA (rear panel) DVI/I Video (rear panel) |
||
|
Display Characteristics |
LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA |
||
|
Waveform File Import Capability |
Import waveform format by series: *.AWG file created by Tektronix AWG5000 or AWG7000 Series *.PAT, *.SEQ, *.WFM, and *.EQU file formats created by Tektronix arbitrary waveform generators such as the AWG400/500/600/700 Series *.TIQ and *.IQT files created by Tektronix real-time spectrum analyzers *.TFW file created by Tektronix AFG3000 Series arbitrary/function generators *.DTG file created by Tektronix DTG5000 Series data timing generators *.WFM or *.ISF file created by Tektronix TDS/DPO Series oscilloscopes text file (*.TXT) |
||
|
Waveform File Export Capability |
Export waveform format by series: Tektronix AWG400/500/600/700 (*.wfm or *.pat) and text format |
||
|
Software Driver for Third-party Applications |
IVI-COM driver, MATLAB library |
||
|
Instrument Control / Data Transfer |
|||
|
GPIB |
Remote control and data transfer (conforms to IEEE-Std 488.1, compatible with IEEE-Std 488.2 and SCPI-1999.0) |
||
|
Ethernet |
Remote control and data transfer (conforms to IEEE-Std 802.3) |
||
|
TekLink |
Remote control and data transfer (proprietary bus for Tektronix product high-speed interconnection and communication) |
||
|
LAN eXtensions for Instrumentation (LXI) |
Class LXI Class C Version 1.3 |
||
Auxiliary Outputs
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Markers |
|||
|
Number |
Total: 8 (2 per channel) |
Total: 4 (2 per channel) |
|
|
Style |
Single ended |
||
|
Connector |
BNC (front panel) |
||
|
Impedance |
50 Ω |
||
|
Level (into 50 Ω) |
Amplitude levels are measured between differential outputs (+) to (–) Single-ended output amplitude level will be one-half the voltage levels below |
||
|
Window |
–2.0 V to 5.4 V |
||
|
Amplitude |
0.2 Vp-p to 7.4 Vp-p |
||
|
Resolution |
10 mV |
||
|
Accuracy |
±(10% of setting + 120 mV) |
||
|
Rise/Fall time (20% to 80%) |
300 ps (1.0 Vp-p, Hi: 1.0 V, Lo: 0.0 V) |
||
|
Timing skew |
|||
|
Range |
0 to 1000 ps |
||
|
Resolution |
50 ps |
||
|
Delay control |
|||
|
Range |
0 to 300 ps |
||
|
Resolution |
1 ps |
||
|
Accuracy |
±(5% of setting + 50 ps) |
||
|
Jitter |
|||
|
Random RMS (typical) |
5 ps |
||
|
Total p-p (typical) |
80 ps (215 – 1 PN pattern at 10–12 BER) |
||
|
10 MHz Reference Out |
|||
|
Amplitude |
1.2 Vp-p into 50 Ω, maximum 2.5 V open |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
|
Clock Out (VCO) |
|||
|
Range |
600 MHz, 1.2 GHz |
||
|
Amplitude |
0.4 Vp-p into 50 Ω to ground |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
|
DC Outputs |
|||
|
Number |
4, independently controlled |
||
|
Range |
–3.0 V to 5.0 V |
||
|
Resolution |
10 mV |
||
|
Accuracy |
±(3% of setting + 120 mV) |
||
|
Connector |
2×4 pin header (front panel) |
||
|
Current (max) |
±100 mA |
||
Auxiliary Inputs
|
Characteristic |
AWG5014C |
AWG5012C |
AWG5002C |
|---|---|---|---|
|
Trigger / Gate In |
|||
|
Polarity |
Pos or Neg |
||
|
Range |
50 Ω: ±5 V 1 kΩ: ±10 V |
||
|
Jitter (typical) |
2.0 ns to 4.5 ns |
||
|
Connector |
BNC (front panel) |
||
|
Impedance |
50 Ω, 1 kΩ |
||
|
Threshold |
|||
|
Level |
–5.0 V to 5.0 V |
||
|
Resolution |
0.1 V |
||
|
Trigger to output uncertainty |
|||
|
Asynchronous (typical) |
Between internal/external clock and trigger timing: 2.0 ns to 4.5 ns |
||
|
Trigger mode |
|||
|
Minimum pulse width |
20 ns |
||
|
Trigger hold-off |
160 × sampling period – 200 ns |
||
|
Delay to output |
48 × sampling period + 500 ns |
||
|
Gated mode |
|||
|
Minimum pulse width |
1024 × sampling period + 10 ns |
||
|
Delay to output |
240 × sampling period + 500 ns |
||
|
Event In |
|||
|
Polarity |
Pos or Neg |
||
|
Range |
50 Ω: ±5 V 1 kΩ: ±10 V |
||
|
Connector |
BNC (front panel) |
||
|
Impedance |
50 Ω, 1 kΩ |
||
|
Threshold |
|||
|
Level |
–5.0 V to 5.0 V |
||
|
Resolution |
0.1 V |
||
|
Sequence mode |
|||
|
Minimum pulse width |
20 ns |
||
|
Event hold-off |
200 × sampling period + 500 ns |
||
|
Delay to output |
260 × sampling period + 300 ns (Jump timing: asynchronous jump) |
||
|
External Clock In |
|||
|
Input voltage range |
0.2 Vp-p to 0.8 Vp-p, –10 dBm to 2 dBm |
||
|
Frequency range |
600 MHz to 1.2 GHz (acceptable frequency drift of ±5%) |
||
|
Clock divider |
1/1, 1/2, 1/4...1/256 |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
|
Fixed Reference Clock In |
|||
|
Input voltage range |
0.2 Vp-p to 3.0 Vp-p, –10 dBm to 14 dBm |
||
|
Frequency range |
10 MHz, 20 MHz, 100 MHz (within ±0.1%) |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
|
Phase Lock In |
|||
|
Input voltage range |
0.2 Vp-p to 3.0 Vp-p, –10 dBm to 14 dBm |
||
|
Frequency range |
5 MHz to 600 MHz (acceptable frequency drift is ±0.1%) |
||
|
Multiplier rate |
1 to 240 |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
|
Add In |
|||
|
Input voltage range |
±1.0 V |
||
|
DC gain |
1 |
||
|
Bandwidth |
DC to 100 MHz (–3 dB) |
||
|
Connector |
BNC (rear panel) |
||
|
Impedance |
50 Ω, AC coupled |
||
Physical Characteristics
|
Dimension |
mm |
in. |
|---|---|---|
|
Height |
245 |
9.6 |
|
Width |
465 |
18 |
|
Depth |
500 |
19.7 |
|
Weight |
kg |
lb. |
|
Net (instrument) |
19.5 |
43 |
|
Net (with packaging) |
28.5 |
62.8 |
|
Mechanical Cooling |
||
|
Clearance |
cm |
in. |
|
Top/Bottom |
2 |
0.8 |
|
Side |
15 |
6 |
|
Rear |
7.5 |
3 |
|
Power Supply |
||
|
Rating |
100 to 240 V AC, 47 to 63 Hz |
|
|
Consumption |
450 Watts |
|
Environmental Characteristics
|
Characteristic |
Description |
|---|---|
|
Temperature |
|
|
Operational |
10 to 40 °C |
|
Nonoperational |
20 to 60 °C |
|
Humidity |
|
|
Operational |
5% to 80% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C |
|
Nonoperational |
5% to 90% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C |
|
Altitude |
|
|
Operational |
Up to 10,000 ft. (3,048 m) |
|
Nonoperational |
Up to 40,000 ft. (12,192 m) |
|
Vibration |
|
|
Sine |
|
|
Operational |
0.33 mm p-p (0.013 in p-p) constant displacement, 5 to 55 Hz |
|
Nonoperational |
N/A |
|
Random |
|
|
Operational |
0.27 g RMS, 5 to 500 Hz, 10 minutes per axis |
|
Nonoperational |
2.28 g RMS, 5 to 500 Hz, 10 minutes per axis |
|
Mechanical Shock |
|
|
Operational |
Half-sine mechanical shocks, 30 g peak, 11 ms duration, 3 drops in each direction of each axis |
|
Nonoperational |
Half-sine mechanical shocks, 10 g peak, 11 ms duration, 3 drops in each direction of each axis |
|
Regulatory |
|
|
Safety |
UL61010-1, CAN/CSA-22.2, No.61010-1-04, EN61010-1, IEC61010-1 |
|
Emissions |
EN55011 (Class A), IEC61000-3-2, IEC61000-3-3 |
|
Immunity |
IEC61326, IEC61000-4-2/3/4/5/6/8/11 |
|
Regional certifications |
|
| < | |
