Temptronic ThermoSpot DCP-101 台式直接接触热循环系统 (-55~175°C)

Temperature Range: -55 to 175°C @ 23°C ambient

Accuracy: ±1.0°C; Stability: ±0.4°C

Cooling Power: 40W @ -40°C

Transition Rates: 25 to -40°C, <1.5 min

Temperature Sensors: Main sensor: RTD, DUT sensors: K thermocouple, Diode, 100Ω RTD, Analog

Temperature Calibration: Software calibrated

Communications Interface: Ethernet (TCP/IP), USB / Optional IEEE488, RS232

Maximum Force Allowable on Thermal Head: 980.6 N (220.4 Lbf)

DUT Dimensions: From 2 x 2mm to 50 x 50mm (0.079” x 0.079” to 2.0 x 2.0”)

Operator Interface: 

5.25” color touch-screen, programmable with 0.1°C resolution

Preset temperatures, ramp, soak, cycle.

Ramp rate control, Graphing and data logging, Web server, Offset calibration

Analog temperature inputs

Thermal Head: 89mm (3.5”) diameter 

Thermal Head Hose: 1.8 meters (70”) long, optional 3.0 meters (118”) long

Frost Free Thermal Head: Low flow dry air or nitrogen purge 0.05cfm, -70°C (-94°F) dew point

Controlled automatically

Physical Dimensions: 445mm D x 356mm W x 299mm H (17.5”D x 14.0”W x 11.75”H)

System Weight: 27.2 Kg (60.0 lbs.)

Noise Level: 55 dBA

Power Requirements:

115 VAC (±10%), 15 amp, 50/60Hz

208/230 VAC (±10%), 10 amp, 50/60Hz

Purge Dry Air Supply: User supplied, regulated, -70°C (-94°F) air or nitrogen, 0.1cfm at 0.2 BAR

Operating Environment: 

Temperature: 5 to 35°C (40 to 95°F)

Humidity: 20 to 95% RH

Compliance: CE | RoHS | EU 517/2014 | designed to meet UL61010

Description

Temptronic® ThermoSpot® DCP-101 Bench Top Temperature Forcing System

For IC characterization, test, and failure analysis with 40W capacity at -40°C

The ThermoSpot Model DCP-101 benchtop temperature forcing system provides a highly responsive, thermally conductive path to quickly induce temperatures to the DUT. This highly reliable system – without thermoelectric modules - uses a thermal probe designed with an interchangeable ThermoBridgeTM to mate directly your IC or other device under test. Using proprietary, robust refrigeration technology, ThermoSpot can perform thermal cycling without the worry of cooling degradation so common with thermoelectric modules employed in competitive systems

User-programmable temperatures, graphing, and data logging are established through the controller’s touch-screen or remote communications. The system provides fast and precise transitions of temperature at the IC, even with variations in device power, and can be used with Temptronic’s proven DUT Control technology using an imbedded diode or external thermocouple

Datasheet

Video