Input Power Requirements: ±5 VDC @ 600 mA (+4.75 to +5.25 V and -4.75 to -5.25 V)
Constant Current Mode
Control Range: 0 to ±500 mA
Setting Accuracy: ±0.5 mA
Compliance Voltage: >3.0 VDC
Ripple & Noise (10 Hz - 10 MHz): <10 μA RMS
Short-Time Fluctuations: <50 μA
Temperature Coefficient: <100 ppm/°C
Drift (<10 Hz Over 30 minutes): <100 μA
Limit Adjust Range: 0 to 500 mA
Limit Accuracy: ±1% of Limit Setpoint
Constant Power Mode
Control Range Photo Diode Current: 5 μA to 2 mA
Setting Accuracy: ±2 μA
Drift (<10 Hz Over 30 minutes): <1 μA
Limit Adjust Range: 0 to >2.5 mA
Limit Accuracy: ±2 μA
Analog Modulation (a )/ Control Voltage
Input Resistance: 10 kΩ
Bandwidth: DC to 50 kHz
Transfer Function (ACC Mode): 50 mA/V
Input Range: 0 to 10 V
(a) The driver for the IP500 can only be modulated with a sinusoidal waveform.
直接联系认证专家