Back-to-Basic Measurement Workshop

We would like to invite you to "Back-to-Basic Measurement Workshop" which co-organized by GW Instek and EMIN Viet Nam

We would like to invite you to participate in "Back-to-Basic Measurement Workshop".

The workshop is co-organized by EMIN Vietnam and Good Will Instek (GW Instek). Good Will Instrument Co. Ltd. (GW Instek) has been a prestige manufacturer of testing and measuring equipment in the world since 1975, offers a wide range of products and solutions that enable accurate, long-term and reliable testing in the hardest testing environments.

Come to this workshop, you will know how to use optimally the equipments: Oscilloscope, Function generator, DC power and LCR meter . You will also be carefully guided to operate on the machine by foreign experts from GW Instek.

Toward the real experience, we chose the classroom layout, each three-person table has five instruments. Thus, you can have the opportunity to experience more real and better understand the information brought.

Time: 9:00 a.m - 4:30 p.m

Ha Noi city: 19, 20, 21 August
Ho Chi Minh City: 24, 25 August

Venue:

Hanoi: 4th floor, VIP3, Mipec Tower, 229 Tay Son, Ward Nga Tu So, District Dong Da, Hanoi, Vietnam
HCMC: Orchid 1, Ramana Saigon Hotel, 323 Le Van Sy, Ward 13, District 3, HCMC, Vietnam

Workshop Agenda:

9:00-9:20 Registration
9:20-9:30 Opening
9:30-10:45 Oscilloscope workshop (1 hr 15 min):
- Oscilloscope overview
- Control (vertical, horizontal, trigger)
- Measurement (manual, cursor, automated)
- Probe usage and compensation
10:45-11:00 Take a break
11:00-12:15 Function Generator workshop (1 hr 15 min):
- Function generator overview
- Signal generation (sine, square, pulse stream)
- Modulation
- Isolated channel
12:15-13:30 Lunch

13:30-14:45 DC Power Supply workshop (1 hr 15 min):
- Power supply overview
- Control (voltage, current)
- Cascading (series parallel)
- CC priority
14:45-15:00 Take a break
15:00-16:15 LCR Meter (1 hr 15 min):
- LCR overview
- Control (test function, voltage, frequency)
- Correction (open, short)
- Comparator (pass/fail)
16:15-16:30 Q&A

Any engineer, manager, scientist, academician or technocrat can attend this one day technical seminar.The audience

Note:

- All activities of the program are free, including lunch, tea-break
- Speaking in English
- Each delagate only can register 01 day.
Your participation is free of charge, but seats are limited. If you have any queries about this event, please do not hesitate to contact us.

Email: marketing@emin.vn

Tel: 024 35381 269
Mob: 0961531195 (Ms.Hanna)

We look forward to hosting you and your team members.

See GWinstek products here!

相关新闻

2026年11月14日 11時35分16秒

What Is Fiber Polarity and How Do You Choose an MPO Method?

Fiber polarity ensures the transmit path connects to the corresponding receive path. For MPO-based duplex channels, the selected method must remain consistent across trunks, cassettes, adapters, and patch cords.

2026年11月14日 10時28分19秒

The scent of new wood in a newly handed-over apartment: How to measure and address formaldehyde (HCHO) levels before moving in

Many people refer to the pungent, acrid odor that emerges when opening a new cabinet as the "smell of new wood," assuming it will simply dissipate after a few days. In reality, however, what is being released could well be formaldehyde—a substance originating from the adhesives used in the pressed-wood panels—and our sense of smell is not a reliable enough gauge to determine the concentration levels present

2026年11月13日 17時23分39秒

Guide to Selecting a TCLP Toxicity Characteristic Leaching Procedure Shaker Configuration in Compliance with QCVN 07:2025/BNNMT and TCVN 9239:2012

Regulation QCVN 07:2025/BNNMT (replacing QCVN 07:2009/BTNMT and QCVN 50:2013/BTNMT) specifies hazardous waste and sludge thresholds based on leachate concentrations. To ensure that analytical results for heavy metals and organic compounds are accepted during ISO/IEC 17025 or VIMCERTS assessments, laboratories must comply with the Toxicity Characteristic Leaching Procedure (TCLP) specified in TCVN 9239:2012, which is equivalent to US EPA Method 1311

2026年11月13日 16時11分22秒

Checking the Temperature of Paint and Coating Surfaces After Curing Using an Infrared Thermometer

An infrared thermometer allows surface temperature measurement without direct contact, making it suitable for products coming out of curing ovens or surfaces that are difficult to access. However, to ensure reliable results for production quality control, it is important to understand the measurement principle and the factors that affect measurements on painted and coated surfaces.

2026年11月13日 15時07分40秒

Crowded Gyms and Yoga Studios: How to Manage Air Quality to Retain Members

Around 6 or 7 in the evening, the gym becomes packed; the music drowns out the sound of heavy breathing, and the air conditioning runs at full blast behind closed doors. At first glance, everything seems fine: the room is cool, the lights are bright, and the equipment is state-of-the-art. Yet, after just a few sessions, regular members begin to feel a heavy-headedness and find themselves running out of breath more quickly eventually, they simply stop renewing their memberships. No one complains about the personal trainers or the exercise machines. The very thing that makes them feel stifled and drives them away is something entirely invisible: the air inside the room