快速支持
直接联系认证专家
-Measurement Method:
+pH: Glass Electrode Method
+ORP: Platinum Electrode
+Ion: Ion Electrode Method
+Conductivity: AC 2-Electrode Method
+DO: Membrane Polarographic Method
+Temperature: Thermistor Resistor
-Conductivity Measuring Frequency: 80Hz/3kHz automatic selection
-Electrode Inputs: 2ch (pH/ORP/Ion/DO Electrode/Conductivity cell connectable)
-Display Unit: Touch Panel Color Graphic LCD
-Display: Selectable 2-ch Simultaneous Display or Single Only Display
-Measurement Item/Range:
+pH: pH 0.000 ～14.000
+ｍV（ORP）: -2000.0 ～ 2000.0 mV
+Ion: Depends on the sensor
+Conductivity: Depends on the cell
+Resistivity: Conversion from conductivity Depend on the cell
+Salinity: Conversion from conductivity
+Concentration: Conversion from conductivity
+TDS: Conversion from conductivity
+DO: Depends on the electrode Saturation %
+Temperature: 0.0 ～100.0℃; DO:0.0 ～ 50.0℃; Ion:Depends on the sensor (No temperature measurement function)
-Display Range:
+pH: pH-2.000 ～16.000
+mV （ORP）: -2200.0 ～ 2200.0 mV
+Ion （Manual/Auto range switching） （mol/L selectable）:
ZOOM OFF:
0.0 ～19.9μg/L
20 ～199μg/L
0.20 ～1.99mg/L
2.0 ～19.9mg/L
20 ～199mg/L
0.20 ～1.99g/L
2.0 ～19.9g/L
20 ～199g/L
200 ～1990g/L
ZOOM OＮ:
0.00 ～19.99μg/L
20.0 ～199.9μg/L
0.200 ～1.999mg/L
2.00 ～19.99mg/L
20.0 ～199.9mg/L
0.200 ～1.999g/L
2.00 ～19.99g/L
20.0 ～199.9g/L
200 ～1999g/L
+Conductivity（Manual/Auto range switching）（Depends on the cell）
0.0 ～ 200.0μS/m （0.000 ～ 2.000μS/cm）
0.000 ～ 2.000mS/m （0.00 ～ 20.00μS/cm）
0.00 ～ 20.00mS/m （0.0 ～ 200.0μS/cm）
0.0 ～ 200.0mS/m （0.000 ～ 2.000mS/cm）
0.000 ～ 2.000S/m （0.00 ～ 20.00mS/cm）
0.00 ～ 20.00S/m （0.0 ～ 200.0mS/cm）
0.0 ～ 200.0S/m （0.000 ～ 2.000S/cm）
SI unit (S/m) and conventional unit (S/cm) selectable
+Resistivity（Manual/Auto range switch）（Depends on the cell）
0.005 ～ 2.000 Ω･m （0.5 ～ 200.0Ω･cm）
0.00 ～ 20.00 Ω･m （0.000 ～ 2.000kΩ･cm）
00.0 ～ 200.0 Ω･m （0.00 ～ 20.00kΩ･cm）
0.000 ～ 2.000kΩ･m （0.0 ～ 200.0kΩ･cm）
0.00 ～ 20.00kΩ･m （0.000 ～ 2.000MΩ･cm）
00.0 ～ 200.0kΩ･m （0.00 ～ 20.00MΩ･cm）
0.000 ～ 2.000MΩ･m （0.0 ～ 200.0MΩ･cm）
0.00 ～ 20.00MΩ･m （0 ～ 2000MΩ･cm）
SI unit (Ω･m) and conventional unit (Ω･cm) selectable
+Salinity:
0.00 ～ 4.04% （NaCl）
0.00 ～ 42.40psu (PSS:Sea water salinity)
+Concentration（Auto range switch）:
0 ～ 2.000%
0 ～ 20.00%
0 ～ 200.0%
+TDS（Manual/Auto range switch）:
0 ～ 99.99mg/L
0 ～ 999.9mg/L
0 ～ 9.999g/L
0 ～ 99.99g/L
0 ～ 999.9g/L
+Dissolved Oxygen: 0.00 ～ 22.00mg/L (High range membrane set (Option) 0.00 ～55.0mg/L)
+Saturation: % 0 ～ 220.0% (High range membrane set (Option) 0 ～ 550%)
+Temperature: -5.0 ～110.0℃
-Display Resolution Switching:
+pH: 0.01pH/0.001pH
+mV （ORP）: 1mV/0.1mV
+Ion: 0.0μg/L～1990g/L (Maximum to 3 digits); 0.00μg/L～1999g/L (Maximum 4 digits)
-Repeatability（Main body unit）:
+pH: ±0.002pH
+mV （ORP）: ±0.2mV
+Ion: ±0.5% FS
+Conductivity: ±0.5% FS
+Resistivity: ±0.5% FS
+Salinity: ±0.5% FS
+Concentration: ±0.5% FS
+TDS: ±0.5% FS
+Dissolved Oxygen: ±0.03mg/L (Standard membrane); ±0.1mg/L (High range membrane)
+Saturation: % ±1% (Standard membrane/High range membrane)
+Temperature: within ±0.2℃
-Temperature compensation:
+pH: Temp. compensation range: ATC （Auto Temperature Compensation）: 0 ～100.0℃; MTC （Manual Temperature Compensation）: 0 ～100.0℃
+Conductivity:
Temp. compensation range: ATC （Auto Temperature Compensation）: 0 ～100.0℃; MTC （Manual Temperature Compensation）: 0 ～100.0℃
N/A: ATC OFF
Standard Temp. setting: 0 ～100.0℃
Temperature Coefficient（Linear）: 0 ～10.00％／℃
Temperature Coefficient（Multipoint）: 2 ～10 points
Pure Water Dual Temperature Compensation: yes
+Dissolved Oxygen: Temperature Compensation Range: ATC （Auto Temperature Compensation）: 0～ 50.0℃;
-pH calibration: JIS pH Standard Solution, US Standard Solution, Custom Standard Solution, Max. 5-point Calibration
-Ion calibration: Max.5-point Calibration
-DO calibration: Auto Calibration （Zero Span Calibration）
-Temp. calibration: 1-point Calibration
-Conductivity Concentration Conversion Setting: 2-10 points
-DO Salinity Compensation Setting: yes
-DO ATM Pressure Compensation Setting: yes
-Performance Guaranteed Temperature, Humidity: 0 ～45℃ 85％ or below （Condensation-free）
-Data Memory: 2000 data each channel
-Print Function: Optional External Printer EPS-P30
-Auto Hold Function: yes
-Auto Hold Conditions Setting: yes
-Statistical Calculation Function: Average Value
-Calibration History Creation Function: Max. 20 run lots
-Interval Measurement: yes
-Security Function: yes
-Upper/Lower Limit Output Setting: yes （1ch only）
-External Input/Output:
+RS-232C Interface: yes （2ch）
+USB （Host）: yes
+USB （Peripheral, Micro）: yes
+Analog Output:
pH: ±700mV （pH0 ～ 14）
mV （ORP）: ±1V （0 ～ ±2000mV）
Ion: 0 ～1VFS
Conductivity/Resistivity/Salinity/Concentration/TDS: 0 ～1VFS
DO/Saturation: 0 ～1VFS
Range(Ion/Conductivity/Resistivity/Salinity/Concentration/TDS): 100mV/Range
Temperature: 0 ～1V （0 ～100℃）
Alarm (1ch only): Upper Limit: Open Collector ; Lower Limit: Open Collector
-Option Connection:
+External Printer: yes
+Turntable （TTT510/710）: yes
+Electrode Selector（ES-1G）: yes
+Cell Selector （ES-1GC） : yes （Single option can be connected to ch-1）
+Control Box （AC-1V）: yes （For ch-1 only）
-Power Source: AC100 ～ 240V （AC Adapter）
-Power Consumption: Approx. 18VA
-Main Unit Dimensions（Excluding Protruding Parts）: Approx. 130 W×60 H×230 D mm
-Main Unit Weight: Approx. 0.9kg
-Inluding:
+ Main unit
+ Sensor Holder: 7430850K
+ Sensor stand (Stand, strut, stopper): 7430860K
+ Tilt stand: 7430870K
+ Sensor attachment (G): 0IB00004
+ Sensor attachment (J): 0IB00005
+ Sensor attachment (DP): 0IB00007
+ Sensor attachment (ION): 0IB00006
+ AC adapter: 7430880K
+ Power cord: 118C229
+ Ground wire (2m): X0979500
+ Beakers (150mL): 0DE00001 (3pcs)
+ Manual
*Note*: Sensors are not included. Necessary ones will ve sold separately.
-Tính năng:
+ Màn hình cảm ứng màu hiện đại
+ Mỗi kênh có thể được kết nối với các điện cực pH/ORP/Ion/DO/Độ dẫn điện
+ Có 2 cổng kết nối (chức năng nhận dạng tự động)
+ Tự động nhận dạng PC, bàn xoay, máy in
+ Thiết bị chuẩn USB
+ Chức năng bộ nhớ dữ liệu lớn(2.000 dữ liệu mỗi kênh)
Các hạng mục đo:
pH, ORP, độ dẫn điện, điện trở, độ mặn, ion, nhiệt độ, DO, bão hòa.
Ứng dụng: Thiết bị này dùng để đo pH, độ dẫn điện, điện trở, độ mặn, DO,TDS, nồng độ trong phòng thí nghiệm.
Datasheet
