Tunix TCLB4-30-100T 水/油/液浴温度校准/测试系统 (-30°C~100°C @25°C)

Water/Oil/Liquid bath temperature calibration/testing system, Control HMI touch screen, Option of External circulation

Internal Volumes(L): 4

Dimension

Workspace dimension (mm): 140x100x100 (WxDxH)

Outer Dimension (mm): 350x600x750 (WxDxH)

Temperature

Temperature range: -30°C to 100°C @25°C

Temperature fluctuation: ±0.08°C 

Temperature uniformity: ±0.1°C

Cooling Medium for -30°C:  4 liter Isopropyl Alcohol / Ethanol

Heating Medium for +100°C: 4 liter Water/ Silicon Oil (5 to 10Cst)

Heating Medium for +200°C: 4 liter Silicon Oil (5 to 10Cst)

Cooling  time: 25°C to -30°C: 60 minutes (Isopropyl Alcohol)

Internal Material: Internal test chamber is manufactured with Stainless steel 

External Material: Exterior material shall be made of MS with powder coated panels/door with impressive precision & aesthetics

Thermal Insulation:  Internal test chamber and outer body is isolated using mineral wool ensuring no air pockets and zero conduction and heat losses

Circulation Pump: light weight high flow Circulation pump for uniform circulation

Refrigeration Compressor: Huayi, Emerson Tecumseh and Danfoss.

Refrigerant: R134a or R-404a 

Cooling mode: Air-Cooled

Evaporator: Evaporator heat exchanger coils

Heater: Inconel material sheathed/ bare nichrome air heaters to achieve the set temperature. 

Controller: 3” Omron(HMI)

Power Supply Requirment: 230VAC +/- 5%, 1 Phase 50 Hz, 2 wire + E.

Connected Load (Max): 2KW

Chamber Drain: 1/4" BSP Female Threaded provision (Gravity Drain)

Condenser: Standard: Air-cooled condenser

Max Noise Level (dbA) Measured @1 metre distance: 10

Ambient Condition: 15°C to 25°C and 10% RH to 90% RH for air cooled system

Note-Circulation Tube Available for Cooling of External Pump like Experimental Test(Viscometer etc.)

Datasheet